Sanyo PLC-XU74 owner manual Fan, Lamp counter, Factory default

Setting

Fan

This function provides the following alternatives in the cooling fans' operation after turning off the projector. (p.19)

L1 . . . normal operation

L2 . . . slower and lower-sound than the normal operation (L1), but it takes longer to cool the projector down.

Lamp counter

This function is used to reset the lamp replacement counter. When replacing the projection lamp, reset the lamp replacement counter by using this function. See page 55 for operation.

Factory default

This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, and the lamp counter to the factory default settings.

Quit

Exit the Setting Menu.

Factory default

Select Factory default and this box appears. Select [Yes], and the next box appears.

Select [Yes] to activate it.

50