Setting
Setting
The Setting Menu allows you to set up other various functions described below.
Setting Menu
1 | Press the Point ed buttons to select the Setting Menu and |
| press the Point 8 or OK buttons to access the submenu |
| items. |
2 | Use the Point ed buttons to select the desired item and |
| press the Point 8 or OK buttons to access the selected item. |
3 | Use the Point ed or OK buttons to adjust the setting. |
Language
The language used in the
Advanced menu
When this function is “On,” the Advanced menu in the Image Level Adjustment can be selected. Press the Point 8 or OK buttons to switch On/Off. See “Image Level Adjustment” on page 30 for details.
Menu position
This function is used to change the position of the
Keystone
When the image is distorted vertically, select Keystone and press the Point 8 or OK buttons. The
Press the Point e button to | Press the Point d button to | ||||||||
reduce the upper width. | reduce the lower width. | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•The arrows are white when there is no correction.
•The arrows disappear at the maximum correction.
•The arrows in the direction of correction turns orange.
•The Keystone dialog box disappears when the Keystone function is not operated for four (4) seconds.
✔Note:
•If you press the RESET button on the remote control while the Keystone dialog box is displayed, the adjustment will go back to the factory default setting.
Language
Press the Point 8 or OK buttons to display the Language Menu.
Choose a language and press the OK or Point 8buttons. The pointer moves to this icon. Press the OK or Point 8 buttons again to activate it.
Menu position
Select Menu position and press the Point 8 or OK buttons. The Menu position screen appears.
36