Sanyo PLV-Z60 owner manual To the Owner, Please help us to conserve the environment we live

Page 4

To the Owner

Before operating this projector, read this manual thoroughly and operate the projector properly.

This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in good condition for many years to come.

Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections, and try the solutions in the “Troubleshooting” section in the back of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS

VOLTAGE CONSTITUTING A RISK OF ELECTRIC

SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE

IMPORTANT OPERATING AND MAINTENANCE

INSTRUCTIONS IN THE OWNER’S MANUAL WITH

THIS UNIT.

NOTE: This symbol and recycle system are applied to EU countries only and not to the countries in the other area of the world.

Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

Please dispose of this equipment at your local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

Safety Precaution

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This projector produces intense light from the projection lens. Avoid staring directly into the lens as much as possible, otherwise eye damage could result. Be especially careful that children do not stare directly into the beam.

Install the projector in a proper position. Otherwise it may result in fire hazard.

Allowing the proper amount of space on the top, sides, and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The dimensions shown here indicate the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained.

Do not cover the ventilation slot on the projector. Heat build- up can reduce the service life of your projector, and can also be dangerous.

SIDE and TOP

REAR

1.5' (50 cm)

3' (1 m)

1.5' (50 cm)

1.5' (50 cm)

If the projector is unused for an extended time, unplug the projector from the power outlet.

CAUTION ON HANGING FROM THE CEILING

When hanging the projector from the ceiling, clean the air intake vents, air filters, and the top of the projector periodically with a vacuum cleaner. If you leave the projector unclean for a long time, the cooling fans can be clogged with dust, and it may cause a breakdown or a disaster.

DO NOT SET THE PROJECTOR IN GREASY, WET, OR SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT A BREAKDOWN OR DISASTER. IF THE PROJECTOR COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY BECOME DETERIORATED.

CAUTION

Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.

Ne peut être utilisé dans une salle d’ordinateurs telle que définie dans la norme ANSI/NFPA 75 Standard for Protection of Electronic Computer/Data Processing Equipment.

READ AND KEEP THIS OWNER’S MANUAL FOR LATER USE.

4

Image 4
Contents Model PLV-Z60 Features and Design Short Throw & Wide-Range Zoom Lens Automatic Slide ShutterTable of Contents To the Owner Please help us to conserve the environment we liveSafety Instructions Voor de klanten in NederlandAir Circulation Installing the Projector in Proper PositionMoving the Projector Compliance Federal Communication Commission NoticePart Names and Functions FrontBack BottomRear Terminal Top Control Remote Control Remote Control Operating Range Remote Control Battery InstallationAdjustable Feet InstallationPositioning the Projector Connecting the AC Power Cord For the U.KFor the U.S.A. and Canada For Continental Europe 120V ACBefore using Moving the LensHorizontal Lens Shift Left/Right Lens Shift RingsConnecting to Video Equipment Video, S-Video Connecting to Video Equipment ComponentVideo, S-video ComponentConnecting to Video Equipment HDMI, RGB Scart Connecting to a ComputerRGB Scart Computer AnalogTop Control Remote Control Main On/Off switch Basic OperationTurning On the Projector Selected Input Source Automatic Slide ShutterTurning Off the Projector How to Operate the On-Screen Menu Top Control Remote ControlOn-Screen Menu Main Menu On-Screen Menu SubmenuMenu and its Functions Zoom and Focus Adjustment Remote Control OperationLight button Freeze buttonReset button Screen buttonNo Show button Image ADJ. buttonInput Input buttons on the remote controlInput Source and System Selection Video or S-Video Menu OperationComponent 1 or Component Hdmi 1 or Hdmi ComputerRGB Analog Source Select MenuImage Image Mode SelectionDirect Operation Image Adjustment Image Mode AdjustmentWhite balance Red White balance GreenWhite balance Blue SharpnessAdvanced menu Lamp irisAuto black stretch Contrast enhancementColor Management Color management pointerReset StorePicture Adjustment Picture Position and Screen AdjustmentScreen Size Adjustment ScreenCaption NormalNormal through Natural wideSetting SettingHdmi setup Off Normal Hdmi setup BackgroundMounting RearPower off confirmation DisplayLogo CaptureTo change the code of the remote control Power managementTo change the code of the projector Shutter demoCleaning Panel adjustmentLamp counter reset Factory defaultInformation Input Source Information DisplayMaintenance and Cleaning Then check the items belowCleaning the RGB panels If the nozzle is pulled outWhich hole to put the nozzle in? Cleaning the Air Filters Cleaning the Projection Lens Cleaning the Projector CabinetReset the Lamp replacement counter Lamp ReplacementSee Lamp Replacement Counter on the next Lamp Replacement Counter Troubleshooting AppendixIndicators and Projector Condition Menu Tree Input ImagePicture adj Screen Information System Mode Chart System mode Freq KHzTechnical Specifications Configurations of Terminals Optional PartsDimensions