Sanyo PLV-Z60 owner manual Rear Terminal

Page 9

Part Names and Functions

Rear Terminal

q

w e

r

S-VIDEO

HDMI 1 HDMI 2 COMPUTER

VIDEO

t

y

COMPONENT 1

COMPONENT 2 Y Pb/Cb Pr/Cr

SERVICEPORT

qCOMPUTER

Connect the computer output signal, or RGB Scart 21- pin video output to this connector (p.17).

wS-VIDEO

Connect the S-Video output signal from video equipment to this jack (p.16).

eCOMPONENT 1 or COMPONENT 2

Connect the component video output signal to these jacks (p.16).

rSERVICE PORT

This jack is used to service the projector.

tHDMI 1/HDMI 2*

Connect the HDMI output signal from video equipment to these terminals (p.17).

yVIDEO

Connect the composite video output signal from video equipment to this jack (p.16).

*Note on the HDMI connector:

Use the HDMI connector less than the size shown below. Otherwise you cannot connect use HDMI 1 and HDMI 2 terminals at the same time.

Maximum dimensions of the HDMI connectors

0.94" (24 mm)				0.59" (15 mm)

WIDTHTHICKNESS

9

Image 9

Contents Model PLV-Z60 Short Throw & Wide-Range Zoom Lens Automatic Slide Shutter Features and DesignTable of Contents Please help us to conserve the environment we live To the OwnerVoor de klanten in Nederland Safety InstructionsInstalling the Projector in Proper Position Air CirculationMoving the Projector Federal Communication Commission Notice ComplianceFront Part Names and FunctionsBack BottomRear Terminal Top Control Remote Control Remote Control Battery Installation Remote Control Operating RangeInstallation Adjustable FeetPositioning the Projector For the U.K Connecting the AC Power CordFor the U.S.A. and Canada For Continental Europe 120V ACMoving the Lens Before usingHorizontal Lens Shift Left/Right Lens Shift RingsConnecting to Video Equipment Component Connecting to Video Equipment Video, S-VideoVideo, S-video ComponentConnecting to a Computer Connecting to Video Equipment HDMI, RGB ScartRGB Scart Computer AnalogBasic Operation Top Control Remote Control Main On/Off switchTurning On the Projector Selected Input Source Automatic Slide ShutterTurning Off the Projector Top Control Remote Control How to Operate the On-Screen MenuOn-Screen Menu Main Menu On-Screen Menu SubmenuMenu and its Functions Remote Control Operation Zoom and Focus AdjustmentLight button Freeze buttonScreen button Reset buttonNo Show button Image ADJ. buttonInput buttons on the remote control InputInput Source and System Selection Menu Operation Video or S-VideoComponent 1 or Component Computer Hdmi 1 or HdmiRGB Analog Source Select MenuImage Mode Selection ImageDirect Operation Image Mode Adjustment Image AdjustmentWhite balance Green White balance RedWhite balance Blue SharpnessLamp iris Advanced menuAuto black stretch Contrast enhancementColor management pointer Color ManagementStore ResetPicture Position and Screen Adjustment Picture AdjustmentScreen Screen Size AdjustmentNormal CaptionNormal through Natural wideSetting SettingOff Normal Hdmi setup Background Hdmi setupMounting RearDisplay Power off confirmationLogo CapturePower management To change the code of the remote controlTo change the code of the projector Shutter demoPanel adjustment CleaningLamp counter reset Factory defaultInput Source Information Display InformationThen check the items below Maintenance and CleaningIf the nozzle is pulled out Cleaning the RGB panelsWhich hole to put the nozzle in? Cleaning the Air Filters Cleaning the Projector Cabinet Cleaning the Projection LensLamp Replacement Reset the Lamp replacement counterSee Lamp Replacement Counter on the next Lamp Replacement Counter Appendix TroubleshootingIndicators and Projector Condition Input Image Menu TreePicture adj Screen Information System mode Freq KHz System Mode ChartTechnical Specifications Optional Parts Configurations of TerminalsDimensions