Setting
Display
This function decides whether to display the
On . . . . . . . . . . . . Show all the
Countdown Off . . Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.
Off . . . . . . . . . . . . Hide the
●
●“Power off?”
●“No signal” for Power management (p.39)
●“Please wait ...”
●Color management operation screen (p.31)
●Panning dialog box when Normal through is selected in the Screen Menu (p.35)
Logo
This function decides on the
User . . . . . Show the Image you captured.
Default . . . Show the
Off . . . . . . . Show the Countdown display only.
✔Note:
• “User” option cannot be selected without capturing an image.
Power off confirmation
When this function is set to “On,” a confirmation dialog box with “Power off?” is displayed when turning off the projector (p.19). Press the Point 8 or OK buttons to switch On/Off.
Capture
This function enables you to capture an image being projected to use it for the
To cancel the Capture function, select [No].
✔Notes:
•A signal from a computer can be captured up to XGA (1024 x 768).
•The image that has been adjusted in the Image adj. Menu will not be reflected even if it is captured.
•When capturing the image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction.
•If the Capture function fails to capture an image or stops capturing halfway, the On- Screen Menu returns to the Capture item.
•The Capture function cannot be operated with unsupported signals.
•When starting to capture a new image, the previously stored image is cleared even if you cancel the capturing.
Capture
Select [Yes] to capture the projected image.
Select [Yes] to stop capturing.
38