Sanyo PLC-XU106K owner manual Part Names and Functions Top Control

Part Names and Functions

Top Control

①	⑦
②	⑧
③	⑨
④	⑩
⑤
⑥

①LAMP REPLACE indicator

Lights yellow when the projection lamp reaches its end of life (pp.57,63).

②ON/STAND-BY button

Turn the projector on or off (pp.19-21).

③INPUT button

Select an input source (pp.29-30, 39-40).

④KEYSTONE button

Correct Standard (for Vertical/Horizontal adjustment) or Corner keystone distortion (pp.25, 48).

⑤POINT▲▼◄► (VOLUME +/-) buttons

–Select an item or adjust the value in the On-Screen Menu (p.22).

–Pan the image in the Digital zoom + mode (p.38).

–Adjust the volume level (Point ◄► buttons) (p.26).

⑥SELECT button

–Execute the selected item (p.22).

–Expand or compress the image in the Digital zoom mode (p.38).

⑦WARNING indicator

–Lights red when the projector detects an abnormal condition.

–Blinks red when the internal temperature of the projector exceeds the operating range (pp.60, 71).

⑧POWER indicator

–Lights red when the projector is in stand-by mode.

–Lights green during operations.

–Blinks green in the Power management mode (p.52).

⑨AUTO SETUP button

Execute the setting of Auto setup (includes Input search, Auto PC adj. and Auto Keystone functions) in the setting menu. (pp.24, 47).

⑩MENU button

Open or close the On-Screen Menu (p.22).

11