Computer Input
Input Source Selection (Computer 1: RGB)
Direct Operation
Choose Computer 1(RGB) by pressing the INPUT button on the top control or press the COMPUTER 1 button on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described below.
Remote Control
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
Menu Operation
Top Control
INPUT button
Computer 1(RGB) / (Component) / (Scart)
Computer 2(RGB)
Video
Input Menu
1 | Press the MENU button to display the |
Menu. Use the Point ▲▼ buttons to select Input and | |
| then press the Point ► or the SELECT button. |
2 | Use the Point ▲▼ buttons to select Computer 1. |
3 | When Computer 1 is selected, press the Point ► to |
access the submenu items. Use the Point ▲▼ buttons |
to select the RGB input source and then press the SELECT button.
Auto
Auto
Computer
1
Note:
When the Input Search function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.47).
29