Computer Input
Computer System Selection
This projector automatically tunes to various types of computers with its
One of the following messages may appear when:
| The projector cannot recognize the connected |
Auto | |
| signal conforming to the provided PC Systems. |
| |
| Auto is displayed on the System Menu box and |
| the Auto PC adjustment function works to display |
| proper images. If the image is not projected |
| properly, a manual adjustment is required. |
|
-----There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 66.)
| The preset system is manually adjusted in the |
Mode 1 | |
| PC adjust Menu. The adjusted data can be |
| |
| stored in Mode |
| PC Systems provided in this projector is chosen. |
SVGA 1 | |
| The projector chooses a proper system provided |
| |
| in the projector and displays it. |
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
1 | Press the MENU button to display the |
Menu. Use the Point ▲▼ buttons to select Input and | |
| then press the Point ► or the SELECT button. |
2 | Use the Point ▲▼ buttons to select System and then |
| press the Point ► or the SELECT button. |
3 | Use the Point ▲▼ buttons to select the desired system |
and then press the SELECT button. |
PC System Menu
The PC System Menu Selected system is displayed.
| Customized Mode |
| |
| PC adjust Menu |
PC System Menu | |
|
Systems in this dialog box
can be selected.
31