Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
Indicators | Projector Condition | ||
POWER | WARNING | LAMP | |
REPLACE |
| ||
red/green | red | yellow |
|
|
|
| |
|
|
|
|
|
|
| The projector is off. (The AC power cord is unplugged.) |
|
|
|
|
|
| | The projector is in |
|
| to turn on the projector. | |
|
|
| |
|
|
|
|
|
| | The projector is operating normally. |
|
|
|
|
|
| | The projector is preparing for |
|
| being cooled down. The projector cannot be turned on until cooling | |
|
|
| is completed and the POWER indicator stops blinking. |
|
|
|
|
|
| | The projector is in the Power management mode. |
|
|
|
|
|
|
| The temperature inside the projector is abnormally high. The |
|
| | projector cannot be turned on. When the projector is cooled down |
|
| enough and the temperature returns to normal, the POWER | |
|
|
| indicator stops blinking and the projector can be turned on. (The |
|
|
| WARNING indicator keeps blinking.) |
|
|
|
|
|
| | The projector has been cooled down enough and the temperature |
|
| returns to normal. When turning on the projector, the WARNING | |
|
|
| indicator stops blinking. |
|
|
|
|
|
|
| The projector detects an abnormal condition and cannot be turned |
|
|
| on. Unplug the AC power cord and plug it again to turn on the |
|
| | projector. If the projector is turned off again, unplug the AC power |
|
| cord and contact the dealer or the service center for service and | |
|
|
| |
|
|
| checkup. Do not leave the projector on. It may cause an electric |
|
|
| shock or a fire hazard. |
|
|
|
|
• • • green. | • • • red | • • • off |
• • • blinks green. | • • • blinks red. |
|
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly.
71