Sanyo PLC-XU106K owner manual Ceiling Rear Power management

Setting

Ceiling

When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

Rear

When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.

Power management

For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period.

Select one of the following options:

Ready	When the lamp has been fully cooled
	down, the POWER indicator changes
	to green blinking. In this condition, the
	projection lamp will be turned on if the
	input signal is reconnected or any button
	on the top control or remote control is
Shut down	pressed.
	When the lamp has been fully cooled
Off	down, the power will be turned off.
	Power management function is off.
Timer	If the input signal is interrupted and
	no button is pressed for more than
	30 seconds, the timer display with No
	signal appears. It starts the countdown
	until the lamp is turned off. Use the Point
	▲▼ buttons to set the Timer(1~30Min.).

Note:

Factory default is Ready: 5 Min.

Ceiling

Rear

Power management

Time left before Lamp is off.

Language	English
Menu position
Auto setup
Keystone
Background	Blue
Display	On
Logo
Ceiling	On
Rear	On
Power management
	Off
On start	Off
Closed caption	CC1
Standby mode	Eco

1/2

52