Video Input
Input Source Selection (Video, S-Video, Component)
Direct Operation
Press the VIDEO button on the remote control to select “Video.”
Before using the VIDEO button, select the correct input source through menu operation as described below.
Menu Operation
Remote Control
VIDEO button
/
1 | Use the MENU button to display the |
| Press the Point 7 8 buttons to move the red frame |
| pointer to the Input Menu icon. |
2 | Use the Point ed buttons to move the red arrow |
| pointer to Video and then press the SELECT button to |
| display the Source Select Menu . |
3 | Move the pointer to the desired source and then press |
| the SELECT button. |
Input Menu
VIDEO
Input Menu icon
Move the pointer to Video and press the SELECT button.
Auto
Video
Component
✔Note:
When selecting “Auto,” the projector automatically detects the incoming video signal, and adjusts itself to optimize
its performance. The projector selects connection in the following order:
1.Component
2.
3.Video
When the video input signal is connected to the VIDEO jack, select Video.
When the video input signal is connected to the
When the input source is coming from video equipment connected to the COMPONENT IN terminal with a Component Cable (not supplied), select Component.
Source Select Menu (VIDEO)
Move the pointer to the desired source and press the SELECT button.
•Computer 2 is not displayed when the COMPUTER IN 2/ MONITOR OUT terminal is set as Monitor out (p.48).
•When the Input Search function is set On1 or On2, the input signal will be searched automatically (p.48)
36