Sanyo PLC-XE50 owner manual Enter a Logo PIN code, Change the Logo PIN code, Logo PIN code lock

Setting

Logo PIN code lock

This function prevents an unauthorized person from changing the screen logo.

Off……the screen logo can be changed freely from

the Logo select menu (p.46).

On……the screen logo cannot be changed without

the Logo PIN code.

If you want to change the Logo PIN code lock setting, enter a Logo PIN code along the following steps. The initial Logo PIN code is set “4321” at the factory.

Enter a Logo PIN code

Select a number by pressing the Point ed buttons. And then press the Point 8 button to fix the number and move the pointer. The number changes to "✳". If you fixed an incorrect number, move the pointer to the number you want to correct by pressing the Point 7 button, and then select the correct number by pressing the Point ed buttons.

Repeat this step to complete entering a four-digit number.

After entering the four-digit number, move the pointer to "Set" by pressing the Point 8 button. Press the SELECT button so that you can change the following Logo PIN code lock settings.

If you entered an incorrect PIN code, "Logo PIN code" and the number (✳✳✳✳) turns red. Enter a correct Logo PIN code all over again.

Change the Logo PIN code

Logo PIN code can be changed to your desired four-digit number. Select “Logo PIN code change” with the Point

dbutton and press the SELECT button. Set a new Logo PIN code.

Be sure to note the new Logo PIN code and keep it at hand. If you lost the number, you could no longer change the Logo PIN code setting. For details on PIN code setting, refer to relevant instructions of the PIN code lock function on pages 50-51.

CAUTION:

when you have changed THE LOGO PIn code, write down the new pin code in column of the LOGO pin code no. memo on page 72, and keep it securely. should the LOGO pin code be lost or forgotten,the LOGO pin code setting can no longer be changed.

Logo PIN code lock

Logo PIN code lock Dialog Box

After a correct Logo PIN code is entered, the following dialog box appears.

Select On/Off by pressing the Point 7 8 buttons or change the Logo PIN code.

47