Sanyo PLC-WL2500 owner manual Part Names and Functions Top Panel

Part Names and Functions

Top Panel

Indicators

①POWER indicator

It turns red when the projector is in the stand-by mode.

It remains green while the projector is under operation. (pp.18, 70)

① ② ③ ② WARNING indicator

Top controls

① ② ③ ④

⑥ ⑤

Emit a red light when the projector detects abnormal condition. This also blinks red when the internal temperature of the projector exceeds the operating range. (pp. 60, 70)

③LAMP REPLACE indicator

Turn yellow when the life of the projection lamp draws to an end. (pp. 63, 70)

①ON/STAND-BY button

Turn the projector on or off (pp.18-20).

②Point ▲▼◄► ( VOLUME – / + ) buttons

–Select an item or adjust the value in the On- Screen Menu (p.21).

–Pan the image in Digital zoom + mode (p.36).

–Adjust the volume level (with Point ◄► buttons) (p.24).

③SELECT button

–Execute the selected item (p.21).

–Expand or compress the image in the Digital zoom mode (p.36).

④MENU button

Open or close the On-Screen Menu (p.21).

⑤KEYSTONE button

Correct the keystone distortion. (pp.23, 46)

⑥INPUT button

Select an input source (pp.27-28, 37-38)

10