Sanyo PLC-WL2500 Keystone, Store or Reset, Background, Display, Countdown off, Power off? p.20

Setting

	Keystone
This function is used to adjust keystone distortion of the		Keystone
projected image. Use the Point ▲▼ buttons to choose the
item you want to adjust.
Keystone
	To correct keystone distortion, press the SELECT button.
	Keystone appears on the screen. Use the Point ▲▼
	buttons to correct keystone distortion (p.23).
Store or Reset
To store or reset the keystone correction, press the Point ►
button.
	Store......Keep the keystone correction even when the AC
	power cord is unplugged.
	Reset.....Release the keystone correction when the AC
	power cord is unplugged.

Background

Select the background screen for when no input signal is detected. Press the Point ▲▼ buttons to switch between each option.

Blue . . Project a blue background.

User . Project an image captured in the Logo setting. Black . Project a black background.

Display

This function decides whether to display On-Screen

Displays.

On	Show all the On-Screen displays. Use
	this function when you want to project
	images after the lamp becomes bright
	enough. The factory default setting is
Countdown off	this option.
	Show the input image instead of
	the countdown when turning on the
	projector. Use this function when you
	want to project the image as early as
	possible even when the lamp is not
Off	bright enough.
	Hide the On-Screen Displays except;
	● On-Screen Menu
	● Power off? (p.20)
	● No signal for Power management.
	(p.51)
	● Please wait
	● Arrows for the True mode in the
	Screen Menu (p.35)
	● P-Timer

46