Hitachi CP-X2510N, CP-X3010N user manual Inst ?

Page 29

PJLink command (continued)

Commands

Control Description

Parameter or Response

 

 

 

 

 

1st byte: Refers to Fan error; one of 0 to 2

 

 

2nd byte: Refers to Lamp error; one of 0 to 2

 

 

3rd byte: Refers to Temptrature error; one of 0 to 2

 

 

4th byte: Refers to Cover error; one of 0 to 2

ERST ?

Error Status inquiry

5th byte: Refers to Filter error; one of 0 to 2

 

 

6th byte: Refers to Other error; one of 0 to 2

 

 

The mearning of 0 to 2 is as given below

 

 

0 = Error is not detected; 1 = Warning; 2 = Error

LAMP ?

Lamp Status inquiry

1st number (digits 1 to 5): Lamp Time

2nd number : 0 = Lamp off, 1 = Lamp on

 

 

INST ?

Input Source List inquiry

11 12 21 22 23

NAME ?

Projector Name inquiry

Responds with the name set in "PROJECTOR

NAME" of "NETWORK"

 

 

INF1 ?

Manufucturer's Name

HITACHI

inquiry

 

 

 

 

CP-X2010N

INF2 ?

Model Name inquiry

CP-X2510N

 

 

CP-X3010N

 

 

 

INFO ?

Other Information inquiry

Responds with the factory information and so on

 

 

 

CLSS ?

Class Information inquiry

1

 

 

 

NOTE • The password used in PJLinkTM is the same as the password set in the Web Brouwser Comtrol. To use PJLinkTM without authentication, do not set any password in Web Browser Control.

For specifications of PJLinkTM, see the web site of the Japan Business Machine and Information System Industries Association.

URL: http://pjlink.jbmia.or.jp/

29

Downloaded from www.Manualslib.com manuals search engine

Image 29
Contents CP-X2010N/CP-X2510N/CP-X3010N Example of computer signalInitial set signals Computer IN1, B Computer IN2, C Monitor OUT Connection to the portsVideo Audio IN1, J Audio IN2 USB To input component video signal to Computer in ports RS-232C Communication ConnectionProtocol Communicaion settingsResponse code / Error code h shows hexadecimal Command Control via the Network Port1 Port Communicaion PortTCP #9715 Command format Command control settingsAutomatic Connection Break AuthenticationNetwork Bridge Communication Communication settings On next RS-232C Communication / Network command tableDefault Be EF Custom C7 FF Be EF 7C FF 7C D1 Be EF Auto Adjust OFF Be EF Computer IN1 AB C3 Component Not all of the languages in the table are supported On next Original Be EF Active Iris is available only for CP-X2510N and CP-X3010N High Be EF Avmt PJLink commandInst ?
Related manuals
Manual 1 pages 10.35 Kb Manual 1 pages 27.63 Kb