Hitachi CP-X2510N, CP-X3010N Connection to the ports, Computer IN1, B Computer IN2, C Monitor OUT

         

    

Connection to the ports

Connection to the ports

NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed.

		LAN
BATTERY
C	B	A

A COMPUTER IN1, B COMPUTER IN2, C MONITOR OUT

D-sub 15pin mini shrink jack <Computer signal>

•Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive)

•H/V. sync. signal: TTL level (positive/negative)

• Composite sync. signal: TTL level <Component video signal>

•Video signal:

-Y, Analog, 1.0±0.1Vp-p with composite sync, 75Ω terminated -Cb/Pb, Analog, 0.7±0.1Vp-p, 75Ω terminated

-Cr/Pr, Analog, 0.7±0.1Vp-p 75Ω terminated

System: 480i@60, 480p@60, 576i@50, 720p@50/60, 1080i@50/60

Pin	Signal	Pin	Signal
1	Video Red, Cr/Pr	9	(No connection)
2	Video Green, Y	10	Ground
3	Video Blue, Cb/Pb	11	(No connection)
4	(No connection)	12	A : SDA (DDC data), (No connection)
5	Ground		B , C : (No connection)
6	Ground Red, Ground Cr/Pr	13	H. sync / Composite sync., (No connection)
7	Ground Green, Ground Y	14	V. sync., (No connection)
8	Ground Blue, Ground Cb/Pb	15	A : SCL (DDC clock), (No connection)
			B , C : (No connection)
			3

Downloaded from www.Manualslib.com manuals search engine