Hitachi CP-X255 Whisper function is working, Lamp is approaching the end of its product Lifetime

Page 54

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

page

 

 

 

 

 

 

The brightness and/or contrast are adjusted to an

 

 

extremely low level.

25

 

Adjust BRIGHTNESS and/or CONTRAST settings to a

 

 

 

higher level using the menu function.

 

Pictures appear

The WHISPER function is working.

25

dark.

Select NORMAL for the WHISPER item in the SETUP

 

menu.

 

 

The lamp is approaching the end of its product

43, 44

 

lifetime.

 

Replace the lamp.

 

 

Either the focus and/or horizontal phase settings are

 

 

not properly adjusted.

30

Pictures appear

Adjust the focus using the focus ring, and/or H PHASE

 

blurry.

using the menu function.

 

 

The lens is dirty or misty.

48

 

Clean the lens referring to the section “Caring for the lens”.

 

 

NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect.

54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Content About contents of package Fastening the lens cover Part names ProjectorComponent CB/PBCR/PR Remote control Control buttonsMagnify Setting up Arrangement For the model CP-S245For the model CP-X255 Adjusting the projectors elevator Using the Security Bar How to attachConnecting your devices About Plug-and-Play capabilityExamples of connection with a computer Examples of connection with a VCR/DVD player Connecting to a monitor outputConnecting to a speaker with amplifier output CB/PBConnecting power supply Remote control Putting batteriesUsing the remote control Power on/off Turning on the powerTurning off the power Operating Adjusting the volumeSelecting an input signal Temporarily muting the soundSelecting an input signal Searching an input signalAdjusting the zoom and focus  For a video signal/no signal 43  169  Small For an RGB signal Using the automatic adjustment featureAdjusting the position  For a video signal or s-video signalNo operation, and the projector will enter the Magnify mode Using the magnify featurePress the on button of Magnify on the remote control Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenAvailable function Remote control operation Operating the computer screenUSB mouse and keyboard control Easy Menu Multifunctional settingsUsing the menu function Advanced MenuEasy Menu Mirror ResetEasy Menu Filter TimePicture Menu GammaColor Temp Picture MenuHigh  Middle  LOW  Custom SecamLOAD1  LOAD2  LOAD3  LOAD4 TV  Film  Turn OFFProgressive SAVE4 SAVE3  SAVE2  SAVE1Over Scan PhaseImage Menu PositionSize Auto AdjustImage Menu ExecuteComponent Input MenuColor Space Video FormatInput Menu InformationSetup Menu VolumeAudio OSD Bright Screen MenuMenu Position Bright  DarkMyScreen Screen MenuStart UP MyScreen LockMessage No Input is DetectedAuto Search Reset  CancelOption Menu Auto OFFOption Menu Network Menu DhcpIP Address Network Menu Refer to the separate volume on Network Functions Network FunctionsMaintenance LampLamp Case of replacement by yourself LampType number = DT00731 Air filter Type number = NJ22222Air filtre Replacing Internal Clock battery Page Related messages There is no input signalInternal temperature is rising Is out of the response parameter range of this unitRegarding the indicator lamps Regarding the indicator lamps Signal cables are not correctly connected Electrical power cord is not pluggedPower switch is not set to the on position Signal source does not correctly workColor settings are not correctly adjusted Volume is adjusted to an extremely low levelAudio setting is not correct Color Space setting is not suitableWhisper function is working Not properly adjustedEither the focus and/or horizontal phase settings are Lamp is approaching the end of its product LifetimeAudio input Communication port SpecificationRGB input Video input Audio outputSpecifications CP-S245/X255 only Controlling the Projector via Scheduling Failure & Warning Alerts via E-mailProjector Management via Snmp Still Image TransferBefore using the network functions… Configuring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Settings Https//192.168.1.10 intoDisplays the Dhcp configuration settings Network InformationDhcp on Network SettingsDisplays and configures network settings Dhcp OFFPort Settings Displays and configures communication port settingsClick the Apply button to save the settings Mail Settings Displays and configures e-mail addressing settingsAlert Settings Displays and configures failure & warning alertsTemp Error Alert SettingsLamp Error Air Flow ErrorLamp Time Error Cool ErrorFilter Error Other Error Schedule Execution ErrorLamp Time Alarm Change the Lamp is Filter Time AlarmAuthentication Failure DisplayedSchedule Settings Displays and configures schedule settingsSchedule Setting Date/Time Settings Displays and configures the date and time settingsParameter Date/Time Settings SntpSecurity Settings SnmpProjector Control Projector ControlProjector Control Projector Status Displays and configures the current projector statusRestarts the projector’s network connection Network RestartLogoff Description RestartFailure & Warning Alerts via E -mail 10Example If the IP address of the projector is set to Mail Settings Snmp settings Projector management via SnmpConfigure the following items via a web browser to use Snmp Controlling the Projector via Scheduling Date/Time Settings 18 Date/Time setting can be adjusted via a web browserSchedule Settings 16 Schedule settings can be configured from a web browserCommunication Port Shot Still Image Transfer SettingsShot Still Image Transfer Display Following port is used for e-Shot TCP #9716Shot Still Image Transfer Settings Shot Still Image Transfer TransmissionCommand Control via the Network Command Control Settings 9Command Control Settings 20Header Data RS-232Ccommand Command formatReply Error code Send Data formatReply Data format Authentication Automatic Connection BreakExample of computer signal Vesa TextVesa Initial set signals Except when set to RGB OUT Connection to the portsComponent Video C Y, D CB/PB, E CR/PR CTS Audio 1-IN Ø3.5 stereo mini jack, I J Audio 2 L/R RCA jackRTS LAN RJ-45 jackConnecting the cable Communications settingRS-232C Communication Using the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandRS-232C Communication Be EF FB FA Color Temp Gain G Aspect Keystone Mute OSD Bright Greece
Top Page Image Contents