Hitachi CP-X255 user manual Alert Settings, Displays and configures failure & warning alerts

Page 67

Settings

Alert Settings

Displays and configures failure & warning alerts.

 

Item

Description

 

 

 

Cover Error

Configures Cover Error alert settings.

 

SNMP Trap

Click the [Enable] check box to enable SNMP Trap alerts for

 

this item.

 

 

 

Send Mail

Click the [Enable] check box to enable e-mail alerts for this

 

item.

 

 

 

Mail Subject

Configures the subject line of the e-mail to be sent.

 

The length of the subject line can be up to 255 alphanumeric

 

 

characters.

 

Mail Text

Configures the text of the e-mail to be sent.

 

The length of the text can be up to 1024 alphanumeric

 

 

characters.

Fan Error

Configures Fan Error alert settings.

 

SNMP Trap

Click the [Enable] check box to enable SNMP Trap alerts for

 

this item.

 

 

 

Send Mail

Click the [Enable] check box to enable e-mail alerts for this

 

item.

 

 

 

Mail Subject

Configures the subject line of the e-mail to be sent.

 

The length of the subject line can be up to 255 alphanumeric

 

 

characters.

 

Mail Text

Configures the text of the e- mail to be sent.

 

The length of the text can be up to 1024 alphanumeric

 

 

characters.

11

Image 67
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Content About contents of package Fastening the lens cover Projector Part namesCB/PB ComponentCR/PR Control buttons Remote controlMagnify Setting up For the model CP-S245 ArrangementFor the model CP-X255 Adjusting the projectors elevator How to attach Using the Security BarAbout Plug-and-Play capability Connecting your devicesExamples of connection with a computer CB/PB Connecting to a monitor outputConnecting to a speaker with amplifier output Examples of connection with a VCR/DVD playerConnecting power supply Putting batteries Remote controlUsing the remote control Turning on the power Power on/offTurning off the power Temporarily muting the sound Adjusting the volumeSelecting an input signal Operating For a video signal/no signal 43  169  Small Searching an input signalAdjusting the zoom and focus Selecting an input signal For a video signal or s-video signal Using the automatic adjustment featureAdjusting the position  For an RGB signalCorrecting the keystone distortions Using the magnify featurePress the on button of Magnify on the remote control No operation, and the projector will enter the Magnify modeTemporarily blanking the screen Freezing the screenOperating the computer screen Available function Remote control operationUSB mouse and keyboard control Advanced Menu Multifunctional settingsUsing the menu function Easy MenuEasy Menu Filter Time ResetEasy Menu MirrorGamma Picture MenuSecam Picture MenuHigh  Middle  LOW  Custom Color TempSAVE4 SAVE3  SAVE2  SAVE1 TV  Film  Turn OFFProgressive LOAD1  LOAD2  LOAD3  LOAD4Position PhaseImage Menu Over ScanExecute Auto AdjustImage Menu SizeVideo Format Input MenuColor Space ComponentInformation Input MenuVolume Setup MenuAudio Bright  Dark Screen MenuMenu Position OSD BrightMyScreen Lock Screen MenuStart UP MyScreenNo Input is Detected MessageAuto OFF Reset  CancelOption Menu Auto SearchOption Menu Dhcp Network MenuIP Address Network Menu Network Functions Refer to the separate volume on Network FunctionsLamp MaintenanceLamp Lamp Case of replacement by yourselfType number = DT00731 Type number = NJ22222 Air filterAir filtre Replacing Internal Clock battery Page Is out of the response parameter range of this unit There is no input signalInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Signal source does not correctly work Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connectedColor Space setting is not suitable Volume is adjusted to an extremely low levelAudio setting is not correct Color settings are not correctly adjustedLamp is approaching the end of its product Lifetime Not properly adjustedEither the focus and/or horizontal phase settings are Whisper function is workingAudio output SpecificationRGB input Video input Audio input Communication portSpecifications CP-S245/X255 only Still Image Transfer Failure & Warning Alerts via E-mailProjector Management via Snmp Controlling the Projector via SchedulingBefore using the network functions… Configuring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Https//192.168.1.10 into SettingsNetwork Information Displays the Dhcp configuration settingsDhcp OFF Network SettingsDisplays and configures network settings Dhcp onDisplays and configures communication port settings Port SettingsClick the Apply button to save the settings Displays and configures e-mail addressing settings Mail SettingsDisplays and configures failure & warning alerts Alert SettingsAir Flow Error Alert SettingsLamp Error Temp ErrorCool Error Lamp Time ErrorFilter Error Schedule Execution Error Other ErrorLamp Time Alarm Displayed Filter Time AlarmAuthentication Failure Change the Lamp isDisplays and configures schedule settings Schedule SettingsSchedule Setting Displays and configures the date and time settings Date/Time SettingsParameter Sntp Date/Time SettingsSnmp Security SettingsProjector Control Projector ControlProjector Control Displays and configures the current projector status Projector StatusDescription Restart Network RestartLogoff Restarts the projector’s network connection10 Failure & Warning Alerts via E -mailExample If the IP address of the projector is set to Mail Settings Projector management via Snmp Snmp settingsConfigure the following items via a web browser to use Snmp Controlling the Projector via Scheduling Date/Time setting can be adjusted via a web browser Date/Time Settings 18Schedule settings can be configured from a web browser Schedule Settings 16Following port is used for e-Shot TCP #9716 Shot Still Image Transfer SettingsShot Still Image Transfer Display Communication PortShot Still Image Transfer Transmission Shot Still Image Transfer SettingsCommand Control Settings 9 Command Control via the Network20 Command Control SettingsSend Data format Command formatReply Error code Header Data RS-232CcommandReply Data format Automatic Connection Break AuthenticationVesa Text Example of computer signalVesa Initial set signals Connection to the ports Except when set to RGB OUTComponent Video C Y, D CB/PB, E CR/PR LAN RJ-45 jack Audio 1-IN Ø3.5 stereo mini jack, I J Audio 2 L/R RCA jackRTS CTSCommunications setting Connecting the cableRS-232C Communication Increasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset CommandRS-232C Communication Be EF FB FA Color Temp Gain G Aspect Keystone Mute OSD Bright Greece