Hitachi CP-X255 user manual Projector management via Snmp, Snmp settings

Page 83

Projector management via SNMP

Projector management via SNMP

When SNMP is enabled, the projector is able to send Failure/Warning Alerts to a speciﬁed PC.

NOTE • It is recommended that SNMP functions be carried out by a network administrator.

•SNMP management software must be installed on the computer to monitor the projector via SNMP.

SNMP settings

(9)

Conﬁgure the following items via a web browser to use SNMP.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter [https://192.168.1.10] into the address bar of the web browser.

2)Enter the Administrator ID and Password and click [Logon].

3)Click [Port Settings] on the main menu.

4)Click the [Enable] check box to open the SNMP Port.

Set the IP address to send the SNMP Trap to when a Failure/Warning occurs.

NOTE • A Network Restart is required after the SNMP Trap conﬁguration settings have been changed. Click [Network Restart] and conﬁgure the following items.

5)Click [Security Settings] on the main menu.

6)Click [SNMP] and set the Community Name on the screen that is displayed.

NOTE • A Network Restart is required after the Community Name has been changed.

• Click [Network Restart] and conﬁgure the following items.

7)Conﬁgure the settings for Trap transmission of Failures/Warnings. Click [Alert Settings] on the main menu and select the Failure/Warning item to be conﬁgured.

8)Click the [Enable] check box to send out the SNMP trap for Failures/Warnings. Clear the [Enable] check box when SNMP trap transmission is not required.

9)Click the [Apply] button to save the settings.

27

Image 83

Contents Trademark acknowledgment About this manualThank you for purchasing this projector Content About contents of package Fastening the lens cover Projector Part namesCR/PR ComponentCB/PB Magnify Remote controlControl buttons Setting up For the model CP-X255 ArrangementFor the model CP-S245 Adjusting the projectors elevator How to attach Using the Security BarAbout Plug-and-Play capability Connecting your devicesExamples of connection with a computer CB/PB Connecting to a monitor outputConnecting to a speaker with ampliﬁer output Examples of connection with a VCR/DVD playerConnecting power supply Putting batteries Remote controlUsing the remote control Turning off the power Power on/offTurning on the power Temporarily muting the sound Adjusting the volumeSelecting an input signal Operating For a video signal/no signal 43  169  Small Searching an input signalAdjusting the zoom and focus Selecting an input signal For a video signal or s-video signal Using the automatic adjustment featureAdjusting the position  For an RGB signalCorrecting the keystone distortions Using the magnify featurePress the on button of Magnify on the remote control No operation, and the projector will enter the Magnify modeTemporarily blanking the screen Freezing the screenUSB mouse and keyboard control Available function Remote control operationOperating the computer screen Advanced Menu Multifunctional settingsUsing the menu function Easy MenuEasy Menu Filter Time ResetEasy Menu MirrorGamma Picture MenuSecam Picture MenuHigh  Middle  LOW  Custom Color TempSAVE4 SAVE3  SAVE2  SAVE1 TV  Film  Turn OFFProgressive LOAD1  LOAD2  LOAD3  LOAD4Position PhaseImage Menu Over ScanExecute Auto AdjustImage Menu SizeVideo Format Input MenuColor Space ComponentInformation Input MenuAudio Setup MenuVolume Bright  Dark Screen MenuMenu Position OSD BrightMyScreen Lock Screen MenuStart UP MyScreenNo Input is Detected MessageAuto OFF Reset  CancelOption Menu Auto SearchOption Menu IP Address Network MenuDhcp Network Menu Network Functions Refer to the separate volume on Network FunctionsLamp MaintenanceLamp Type number = DT00731 Case of replacement by yourselfLamp Type number = NJ22222 Air ﬁlterAir ﬁltre Replacing Internal Clock battery Page Is out of the response parameter range of this unit There is no input signalInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Signal source does not correctly work Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connectedColor Space setting is not suitable Volume is adjusted to an extremely low levelAudio setting is not correct Color settings are not correctly adjustedLamp is approaching the end of its product Lifetime Not properly adjustedEither the focus and/or horizontal phase settings are Whisper function is workingAudio output SpeciﬁcationRGB input Video input Audio input Communication portSpeciﬁcations CP-S245/X255 only Still Image Transfer Failure & Warning Alerts via E-mailProjector Management via Snmp Controlling the Projector via SchedulingBefore using the network functions… Conﬁguring and controlling the projector via a web browser Conﬁguring and controlling the projector via a web browser Https//192.168.1.10 into SettingsNetwork Information Displays the Dhcp conﬁguration settingsDhcp OFF Network SettingsDisplays and conﬁgures network settings Dhcp onClick the Apply button to save the settings Port SettingsDisplays and conﬁgures communication port settings Displays and conﬁgures e-mail addressing settings Mail SettingsDisplays and conﬁgures failure & warning alerts Alert SettingsAir Flow Error Alert SettingsLamp Error Temp ErrorFilter Error Lamp Time ErrorCool Error Lamp Time Alarm Other ErrorSchedule Execution Error Displayed Filter Time AlarmAuthentication Failure Change the Lamp isDisplays and conﬁgures schedule settings Schedule SettingsSchedule Setting Parameter Date/Time SettingsDisplays and conﬁgures the date and time settings Sntp Date/Time SettingsSnmp Security SettingsProjector Control Projector ControlProjector Control Displays and conﬁgures the current projector status Projector StatusDescription Restart Network RestartLogoff Restarts the projector’s network connectionExample If the IP address of the projector is set to Failure & Warning Alerts via E -mail10 Mail Settings Conﬁgure the following items via a web browser to use Snmp Snmp settingsProjector management via Snmp Controlling the Projector via Scheduling Date/Time setting can be adjusted via a web browser Date/Time Settings 18Schedule settings can be conﬁgured from a web browser Schedule Settings 16Following port is used for e-Shot TCP #9716 Shot Still Image Transfer SettingsShot Still Image Transfer Display Communication PortShot Still Image Transfer Transmission Shot Still Image Transfer SettingsCommand Control Settings 9 Command Control via the Network20 Command Control SettingsSend Data format Command formatReply Error code Header Data RS-232CcommandReply Data format Automatic Connection Break AuthenticationVesa Example of computer signalVesa Text Initial set signals Connection to the ports Except when set to RGB OUTComponent Video C Y, D CB/PB, E CR/PR LAN RJ-45 jack Audio 1-IN Ø3.5 stereo mini jack, I J Audio 2 L/R RCA jackRTS CTSRS-232C Communication Connecting the cableCommunications setting Increasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset CommandRS-232C Communication Be EF FB FA Color Temp Gain G Aspect Keystone Mute OSD Bright Greece