Hitachi CP-S860W Do not sit or place heavy objects on this projector, Care and maintenance

Page 6

Caution

■Do not sit or place heavy objects on this projector.

•Do not sit on this projector.

This could result in overturning, leading to damage or personal injury. Use special caution in households where children are present.

•Do not place heavy objects on this projector.

Placing heavy objects on this projector could result in loss of balance or falling and cause personal injury.

■Do not block the ventilation openings.

Do not block the ventilation openings of this projector. Blocking ventilation could lead to internal overheating which could result in fire. Do not place this projector on its

side during use or push it into a small, poorly ventilated location. Do not place this projector on a carpet or bedding or cover it with a table cloth,

etc. Also, when installing this projector, make sure the ventilation openings are at least 10cm from the wall.

■Care and maintenance.

For safety purposes, disconnect the power plug from the power outlet

before starting the care and maintenance of this projector.

Disconnect the plug from the power outlet.

■Battery usage.

•Use only the specified batteries with this projector. Do not mix old

and new batteries because this could result in fire or personal injury due to battery cracking or leakage.

•Make sure the plus and minus terminals are correctly aligned

when loading the batteries.

Incorrect loading could result in personal injury or contamination of

the surroundings due to battery cracking or leakage.

■Clean the projector interior once every two years.

Request your dealer to clean the interior of the projector approximately every two years. Accumulations of dust inside the projector can result in fire or

malfunction if not cleaned for an extended period. This cleaning is more effective if performed befor every humid periods such as rainy season, etc. Ask your dealer for details about internal cleaning.

■Avoid installation in humid or dusty locations.

•Do not install this projector in a humid or dusty location. This could

result in fire or electrical shock.

•Avoid installation near the

kitchen, a humidifier or other locations where there is oily smoke or humidity.

This could result in fire or electrical shock.

■Use the caster brakes.

When installing this projector on a stand with casters, use the caster brakes to prevent the stand moving or overturning and causing personal injury.

■Do not handle the power cord roughly.

•Keep the power cord away from heaters because the heat could melt the

power cord and cause fire or electrical shock.

•Do not touch the power plug

with wet hands because this

could result in electrical shock.

•When disconnecting the

power plug, do not pull on the power cord. This could damage the power cord and cause fire or electrical shock. Always grip the plug when disconnecting.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Features ContentsPageOutline Page Before Use Do not look through the lens when the lamp is on If a problem should occurDo not install on an unstable surface Use only the indicated power supplyHandle the power cord with care Do not position the powerDo not allow the laser beam to enter the eyes Clean the projector interior once every two years Care and maintenanceBattery usage Avoid installation in humid or dusty locationsLens care Sound volumeAvoid excessively hot locations Cabinet careChecking the package Contents Names and functions of each partVideo in jack Main power switchAC in jack RGB in jackRemote control transmitter Disk PAD2Loading the batteries 1Remove the battery cover3Close the battery cover Make sure the plus and minus poles are correctly orientedUsing the adjusters InstallationTypical LCD Projector and Screen Installation Top view Side viewBasic operations To projectPlug & Play Turning off the powerTurn off the main power switch of the projector OFF Press the STANDBY/ON button for approximately 1 secFreeze function Cancelling the Freeze functionFreeze function will be cancelled Press the Freeze buttonMoving the display area Magnify functionChanging the magnification ratio Returning to normal displayPress the Menu Adjustments and functionsReturning to the initial settings Menu screen will appear. refer to page 18-21 for detailsUsing the Setup Menu Input RGBKeystone BlankTimer Communication functions, etc., can be set from the OPT menuLanguage Input signals Connection to the video signal terminalsConnection to the RGB signal terminal Signal input jacksConnection to the RGB signal terminal Example of computer signalConnection to the RGB signal terminal Initial set signalsConnecting the USB Connection to the control signal terminal Mouse functionsControl signal jack ADB Mac mouseSerial mouse RS232C communication Command data chart System VideoRequesting projector status Pull out the power cord Remove the front air filter Example of system setupCleaning the Air filter Clean the air filter about every 100 hoursLamp Cleaning the air filter with a vacuum cleanerInstalling the air filter Message tableWhen you think something wrong Indicators· These specifications are subject to change without notice SpecificationsDimensional Diagram Cannot be used in any other countryAbout the warranty and after-service About the warrantyRepairs after the warranty period has elapsed QR41821 InhaltSeite KurzbeschreibungMerkmale ModellPage Vor der Inbetriebnahme Warnung VorsichtNiemals das Gehäuse öffnen Bei Auftreten von BetriebsstörungenNicht auf unstabilen Flächen aufstellen Nicht modifizierenKann zu Bränden oder elektrischen Schlägen führen Nur mit der korrekten Netzspannung betreibenDas Netzkabel vorsichtig handhaben Betreiben Sie den Projektor ausschließlichBatteriebetrieb Die Belüftungsöffnungen nicht blockierenWartung und Pflege Den Projektor alle zwei Jahre innen säubern lassenÜbermäßig heiße Plätze vermeiden Wenn der Projektor längere Zeit nicht benutzt wirdTransport des Projektors LautstärkeÜberprüfung des Lieferumfangs Bezeichnung und Funktion der TeileProjektor Vorsicht Anschluß an die Netzeingangsbuchse AC Mouse RESET/RIGHT FernbedienungsteilMagnify 1Den Batteriefachdeckel 2Einlegen der Batterien Abnehmen Vorsicht Vorsichtsmaßregeln für den Batteriebetrieb3Den Batteriefachdeckel wieder anbringen Verwendung der Fußversteller AufstellungTypische Aufstellung von LCD-Projektor und Leinwand AufsichtDie Taste Standby / on drücken Grundlegende BedienungProjizieren von Bildern Das angeschlossene Gerät einschaltenGrundlegende Bedienung Fortsetzung Ausschalten der NetzversorgungFesthalten-Funktion Aufheben der FREEZE-FunktionDie FREEZE-Funktion wird aufgehoben Verschieben des Anzeigebereichs VergrößerungsfunktionÄndern des Vergrößerungsverhältnisses Zurückstellen auf normale AnzeigeDas Menübild erscheint Einzelheiten siehe Seite Einstellungen und FunktionenRückstellung auf die Anfangseinstellungen Der gewählte Menügegenstand erscheint jetzt grünVerwendung des Einrichten-Menüs Setup Einstellungen und Funktionen FortsetzungFH horizontale Sync-Frequenz Trapez StartenBILD-IN-BILD Sprache AUTOM-AUSSync EIN G Anschluß an die Video-Eingangsbuchsen EingangssignaleSignaleingänge Anschluß an die RGB-BuchseBeispiel eines Computersignals Anschluß an die RGB-Buchse FortsetzungAnfangseinstellungssignale Computer/Signal Horizontale Signalsteuerung µsAnschluß der USB-Maus Anschluß an die Steuersignalbuchse MausfunktionenDurchlesen Steuersignalbuchse Control ADB-Maus MacSerienmaus Anschluß an die Steuersignalbuchse Fortsetzung RS232C-DatenaustauschBefehlsdatentabelle Wenn in Datenübertragungsblockfehler auftritt Den Luftfilter etwa alle 100 Betriebsstunden säubern Systemübersicht BeispielReinigen des Luftfilters Filter Modell LuftfilterMeldungstabelle Reinigen des Luftfilters FortsetzungLampe BildschirmanzeigenAbhilfe bei Problemen Meldungstabelle FortsetzungAnzeigen Abmessungsdiagramm Nicht in anderen Ländern verwendet werdenEinheit mm Zum Kundendienst Garantie und KundendienstZur Garantie Reparaturen während der GarantiezeitQR41821

CP-S860W specifications

The Hitachi CP-S860W is a high-performance projector designed to deliver exceptional image quality, making it an ideal choice for a variety of settings, including classrooms, corporate environments, and large venues. With its advanced features and cutting-edge technologies, the CP-S860W stands out as a reliable and versatile projection solution.

One of the key features of the Hitachi CP-S860W is its high brightness output, providing up to 6,500 lumens. This brightness capability ensures that images remain clear and vibrant even in well-lit environments, making it suitable for presentations and lectures where ambient light cannot be fully controlled. The projector's native WXGA resolution (1280 x 800 pixels) enhances image clarity, allowing for detailed visuals that are essential for displaying graphs, charts, and other data-heavy content.

The CP-S860W incorporates advanced image processing technologies, such as a built-in scaler and various color enhancement features. These technologies enable the projector to deliver a rich color palette and sharp detail, ensuring that images maintain fidelity and color accuracy. Additionally, it supports multiple resolutions, allowing users to project content from various devices without loss in quality.

Another notable characteristic of the CP-S860W is its versatile connectivity options. The projector is equipped with multiple HDMI ports, RGB inputs, and composite video connections, making it compatible with a wide range of devices, including laptops, DVD players, and gaming consoles. Its compatibility with wireless presentation systems also allows for hassle-free connections, enabling users to present without being tethered by cables.

The projector features a long lamp life of up to 5,000 hours in standard mode and up to 10,000 hours in eco mode. This longevity minimizes maintenance needs and reduces total cost of ownership, making it a cost-effective investment. Moreover, its eco-friendly features, including energy-saving modes, contribute to lower power consumption, aligning with sustainable practices.

With a weight of approximately 11.5 pounds, the Hitachi CP-S860W is portable enough for easy transportation between locations, while robust enough for permanent installation. Its user-friendly interface and intuitive remote control facilitate seamless operation, ensuring an efficient setup process for any presentation.

In summary, the Hitachi CP-S860W projector combines high brightness, versatile connectivity, and advanced image processing technologies, making it a powerful tool for delivering engaging and impactful visual presentations in any environment.
Top Page Image Contents