Hitachi CP-S860W 1Remove the battery cover, 2Loading the batteries, 3Close the battery cover

Page 11
PLACE OF MANUFACTURER:A
MADE IN JAPAN

Names and functions of each part (continued)

Loading the batteries Loading AA batteries into the remote control.

1Remove the battery cover.

Press the battery cover and slide it in the direction of the arrow.

Caution Battery usage cautions

•Use only the specified batteries with this projector. Also, do not mix new and old batteries. This could cause in battery cracking or leakage, which could result in fire or personal injury.

•When loading the batteries, make sure the plus and minus poles are correctly oriented as indicated in the projector. Incorrect orientation could cause battery cracking or leakage, which could result in personal injury or pollution of the surrounding environment.

2Loading the batteries.

Make sure the plus and minus poles are correctly oriented.

3Close the battery cover.

Caution Remote control usage cautions

•Do not drop the remote control or apply impact.

•Do not wet the remote control or place it on any wet object. Such actions could result in

malfunction.

•When not to be used for an extended period, remove the batteries from the remote control.

•Replace the batteries when remote control operation becomes difficult.

•Do not place the remote control close to the cooling fan of the projector.

•Do not disassemble the remote control in case of malfunction. please bring it to the service station.

Warning The laser pointer of the remote control is used in place of a finger or rod. Never look directly into the laser beam outlet or point the laser beam at other people.

The laser beam can cause vision problems.

C A U T I O N

LASER RADIATION-

DO NOT STARE INTO BEAM

WAVE LENGTH: 650nm

MAX . OUTPUT: 1mW

CLASS 2 LASER PRODUCT

RADIAZIONI LASER

NON GUARDARE NEL RAGGIO LUCE

APPARECCHIO LASER DI CLASSE 2

RAYONNEMENT LASER MANUFACTURED

NE PAS REGARDER DANS

LE FAISCEAU APPAREIL

A LASER DE CLASSE 2

LASER-STRAHLUNG

NICHT IN DEN STRAHL

BLICKEN LASER KLASSE2

IEC60825-1:1993+A1:1997

AVOID EXPOSURE-

LASER RADIATION IS

EMITTED FROM THIS

APERTURE

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Outline FeaturesContentsPage Page Before Use Use only the indicated power supply If a problem should occurDo not install on an unstable surface Do not look through the lens when the lamp is onDo not allow the laser beam to enter the eyes Handle the power cord with careDo not position the power Avoid installation in humid or dusty locations Care and maintenanceBattery usage Clean the projector interior once every two yearsCabinet care Sound volumeAvoid excessively hot locations Lens careNames and functions of each part Checking the package ContentsRGB in jack Main power switchAC in jack Video in jackDisk PAD Remote control transmitterMake sure the plus and minus poles are correctly oriented 1Remove the battery cover3Close the battery cover 2Loading the batteriesTop view Side view InstallationTypical LCD Projector and Screen Installation Using the adjustersTo project Basic operationsPress the STANDBY/ON button for approximately 1 sec Turning off the powerTurn off the main power switch of the projector OFF Plug & PlayPress the Freeze button Cancelling the Freeze functionFreeze function will be cancelled Freeze functionReturning to normal display Magnify functionChanging the magnification ratio Moving the display areaMenu screen will appear. refer to page 18-21 for details Adjustments and functionsReturning to the initial settings Press the MenuUsing the Setup Menu RGB InputBlank KeystoneLanguage TimerCommunication functions, etc., can be set from the OPT menu Signal input jacks Connection to the video signal terminalsConnection to the RGB signal terminal Input signalsExample of computer signal Connection to the RGB signal terminalInitial set signals Connection to the RGB signal terminalConnecting the USB Mouse functions Connection to the control signal terminalSerial mouse Control signal jackADB Mac mouse RS232C communication System Video Command data chartRequesting projector status Clean the air filter about every 100 hours Example of system setupCleaning the Air filter Pull out the power cord Remove the front air filterMessage table Cleaning the air filter with a vacuum cleanerInstalling the air filter LampIndicators When you think something wrongCannot be used in any other country SpecificationsDimensional Diagram · These specifications are subject to change without noticeRepairs after the warranty period has elapsed About the warranty and after-serviceAbout the warranty QR41821 Modell KurzbeschreibungMerkmale InhaltSeitePage Warnung Vorsicht Vor der InbetriebnahmeNicht modifizieren Bei Auftreten von BetriebsstörungenNicht auf unstabilen Flächen aufstellen Niemals das Gehäuse öffnenBetreiben Sie den Projektor ausschließlich Nur mit der korrekten Netzspannung betreibenDas Netzkabel vorsichtig handhaben Kann zu Bränden oder elektrischen Schlägen führenDen Projektor alle zwei Jahre innen säubern lassen Die Belüftungsöffnungen nicht blockierenWartung und Pflege BatteriebetriebLautstärke Wenn der Projektor längere Zeit nicht benutzt wirdTransport des Projektors Übermäßig heiße Plätze vermeidenProjektor Überprüfung des LieferumfangsBezeichnung und Funktion der Teile Vorsicht Anschluß an die Netzeingangsbuchse AC Magnify Mouse RESET/RIGHTFernbedienungsteil 3Den Batteriefachdeckel wieder anbringen 1Den Batteriefachdeckel 2Einlegen der Batterien AbnehmenVorsicht Vorsichtsmaßregeln für den Batteriebetrieb Aufsicht AufstellungTypische Aufstellung von LCD-Projektor und Leinwand Verwendung der FußverstellerDas angeschlossene Gerät einschalten Grundlegende BedienungProjizieren von Bildern Die Taste Standby / on drückenAusschalten der Netzversorgung Grundlegende Bedienung FortsetzungDie FREEZE-Funktion wird aufgehoben Festhalten-FunktionAufheben der FREEZE-Funktion Zurückstellen auf normale Anzeige VergrößerungsfunktionÄndern des Vergrößerungsverhältnisses Verschieben des AnzeigebereichsDer gewählte Menügegenstand erscheint jetzt grün Einstellungen und FunktionenRückstellung auf die Anfangseinstellungen Das Menübild erscheint Einzelheiten siehe SeiteEinstellungen und Funktionen Fortsetzung Verwendung des Einrichten-Menüs SetupFH horizontale Sync-Frequenz BILD-IN-BILD TrapezStarten Sync EIN G SpracheAUTOM-AUS Anschluß an die RGB-Buchse EingangssignaleSignaleingänge Anschluß an die Video-EingangsbuchsenAnschluß an die RGB-Buchse Fortsetzung Beispiel eines ComputersignalsComputer/Signal Horizontale Signalsteuerung µs AnfangseinstellungssignaleAnschluß der USB-Maus Durchlesen Anschluß an die SteuersignalbuchseMausfunktionen Serienmaus Steuersignalbuchse ControlADB-Maus Mac RS232C-Datenaustausch Anschluß an die Steuersignalbuchse FortsetzungBefehlsdatentabelle Wenn in Datenübertragungsblockfehler auftritt Filter Modell Luftfilter Systemübersicht BeispielReinigen des Luftfilters Den Luftfilter etwa alle 100 Betriebsstunden säubernBildschirmanzeigen Reinigen des Luftfilters FortsetzungLampe MeldungstabelleAnzeigen Abhilfe bei ProblemenMeldungstabelle Fortsetzung Einheit mm AbmessungsdiagrammNicht in anderen Ländern verwendet werden Reparaturen während der Garantiezeit Garantie und KundendienstZur Garantie Zum KundendienstQR41821

CP-S860W specifications

The Hitachi CP-S860W is a high-performance projector designed to deliver exceptional image quality, making it an ideal choice for a variety of settings, including classrooms, corporate environments, and large venues. With its advanced features and cutting-edge technologies, the CP-S860W stands out as a reliable and versatile projection solution.

One of the key features of the Hitachi CP-S860W is its high brightness output, providing up to 6,500 lumens. This brightness capability ensures that images remain clear and vibrant even in well-lit environments, making it suitable for presentations and lectures where ambient light cannot be fully controlled. The projector's native WXGA resolution (1280 x 800 pixels) enhances image clarity, allowing for detailed visuals that are essential for displaying graphs, charts, and other data-heavy content.

The CP-S860W incorporates advanced image processing technologies, such as a built-in scaler and various color enhancement features. These technologies enable the projector to deliver a rich color palette and sharp detail, ensuring that images maintain fidelity and color accuracy. Additionally, it supports multiple resolutions, allowing users to project content from various devices without loss in quality.

Another notable characteristic of the CP-S860W is its versatile connectivity options. The projector is equipped with multiple HDMI ports, RGB inputs, and composite video connections, making it compatible with a wide range of devices, including laptops, DVD players, and gaming consoles. Its compatibility with wireless presentation systems also allows for hassle-free connections, enabling users to present without being tethered by cables.

The projector features a long lamp life of up to 5,000 hours in standard mode and up to 10,000 hours in eco mode. This longevity minimizes maintenance needs and reduces total cost of ownership, making it a cost-effective investment. Moreover, its eco-friendly features, including energy-saving modes, contribute to lower power consumption, aligning with sustainable practices.

With a weight of approximately 11.5 pounds, the Hitachi CP-S860W is portable enough for easy transportation between locations, while robust enough for permanent installation. Its user-friendly interface and intuitive remote control facilitate seamless operation, ensuring an efficient setup process for any presentation.

In summary, the Hitachi CP-S860W projector combines high brightness, versatile connectivity, and advanced image processing technologies, making it a powerful tool for delivering engaging and impactful visual presentations in any environment.
Top Page Image Contents