Hitachi CP-X880W, CP-X885W user manual Lamp, Do not use the projector with the lamp cover removed

Page 28

THE LAMP

HIGH VOLTAGE

HIGH TEMPERATURE

HIGH PRESSURE

To replace the lamp, check the model number of the replacement lamp (sold separately) and contact your local dealer.

Replacement lamp model number: DT00531

If the projector is mounted on the ceiling, or if the lamp has broken, ask your dealer to replace the lamp. Lamp replacement is hazardous and should not be attempted by the user.

Before replacing the lamp, make sure the power switch is off and the power cable is not plugged in, then wait at least 45 minutes for the lamp to cool sufficiently. Handling the lamp while hot can cause burns, as well as damaging the lamp.

The LCD projector uses a glass lamp bulb. It is a mercury lamp with high WARNING internal pressure. High-pressure mercury lamps can break with a loud

bang, or burn out, if jolted or scratched, or through wear over time. Each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes.

•Do not open the lamp cover while the projector is suspended from above. This is dangerous, since if the lamp’s bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken.

•Handle with care: jolting or scratching could cause the lamp bulb to burst during use.

•If the replace lamp indicator (see "Related Messages" (Vol.2 8 ) and "Regarding the

indicator Lamps" (Vol.2 9 )) comes on, replace the lamp as soon as possible. Using the lamp for long periods of time, or past the replacement date, could cause it to burst. Do not use old (used) lamps; this is a cause of breakage.

•If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative.

•If the lamp should break (it will make a loud bang when it does), ventilate the room well, and make sure not to breathe the gas that comes out of the projector vents, or get it in your eyes or mouth.

•If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the projector’s internals, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself.

•Obey local ordinances when disposing of used lamps. In most cases, it is possible to dispose of used bulbs in the same manner as used glass bottles, but in some cases, bulbs are sorted separately.

•Do not use the projector with the lamp cover removed.

27

Page 27 Page 29
Image 28
Page 27 Page 29
Contents CP-X880W / CP-X885W Contents Projector Features Power cordSoft carrying case Remote control US Type UK Type Europe Type Projector With Lens CapOnly use the power cord that came with the projector Devices you will be using to the projectorPart Names Remote Control Setting UP the Projector Adjusting the Projectors Elevator FeetPress and hold in the elevator Buttons Turn the elevator screw to fine tuneScreen Adjusting the Screen Size and Projection DistanceTop view Side view Connecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerBNC Input DVI Input A a aConnecting to a VCR Connecting to a DVD PlayerConnecting to a Display Monitor Using the Remote Control Putting batteries into the remote control unitRemove the battery cover Close the battery coverUsing the Remote Control Operating the remote controlRemote control in an area free from obstacles Meters with a 40-degree rangeTurning on the Power Turning on the Power Selecting an Input SignalTurning OFF the Power Adjusting the Volume Press the Volume buttonUse the lever switch / to adjust the volume Temporarily Muting the SoundUse the , , , buttons to adjust the position Adjusting the PositionPress the Position button Using the Automatic Adjustment Feature Automatic Adjustment for RGB InputAutomatic Adjustment for Video Input Press the Auto buttonCorrecting Keystone Distortions Press the Keystone buttonAs illustrated on the right, a dialog will appear On the screen to aid you in correcting the distortionUsing the Magnify Feature Freezing the ScreenAdjusting Screen with ONE-TOUCH Was begun When BNC RGB is selectedPress the ONE Touch button You can activate the following functions just bySelecting the Aspect Ratio Temporarily Blanking the ScreenPress the Aspect button Press the Blank buttonUse the lever switch To adjust the level Using the Menu FunctionsPress the Menu button Available Functions Remote Control Operation Operating the PC ScreenLamp High Voltage High Temperature High PressureDo not use the projector with the lamp cover removed Lamp Replacing the lampAIR Filter Caring for the air filterAIR Filter Replacing the air filterCaring for the cabinet and remote control transmitter Other CareCaring for the inside of the projector Caring for the lensFor Technical see the end of this manual Multifunctional Settings Main MenuMain Menu Item selectionPICTURE-1 Menu PICTURE-2 MenuPICTURE-1 Menu PICTURE-2 MenuInput Menu Multifunctional SettingsInput Menu Auto Menu Auto MenuScreen Menu Screen MenuOption Menu Wireless MenuOption Menu Related Messages Regarding the Indicator Lamps Power Lamp TempPhenomena That May Easily Be Mistaken for Machine Defects Vol.2-2Vol.2-3 Vol.2-7Specifications Dimension DiagramSpecification Unit mmWarranty and AFTER-SERVICE Signal Connector PIN Assignment Signal Terminal SpecificationRGB in 1/2 Sub 15-pin ShrinkExample of Computer Signal Resolution FH kHz FV Hz Rating Signal mode Display modeInitial SET Signals Connection to the Mouse Control ADB MouseUSB Mouse PS/2 MouseCommand data Consist of header 7 bytes + command data 6 bytesRS-232C Communication ProtocolRS-232C Communication Command data chart C4 D3Be EF BA D2 Be EF AD D0 Be EF CB D0 Regulatory Notices Hitachi Europe GmbH Hitachi Sales Europe GmbHHitachi Business Systems Nordic Hitachi France
Related manuals
Manual 56 pages 57.71 Kb

CP-X880W, CP-X885W specifications

The Hitachi CP-X885W and CP-X880W projectors are powerful and versatile projection solutions tailored for educational and corporate environments. Known for their reliability and superior performance, both models deliver high-quality visuals with a focus on user-friendly operations.

One of the outstanding features of the CP-X885W and CP-X880W is their brightness, rated at 3,600 ANSI lumens. This level of brightness allows the projectors to function effectively in a variety of lighting conditions, ensuring that presentations and videos are visible even in well-lit rooms. The native WXGA resolution (1280x800) contributes to sharp, detailed images, making these projectors ideal for displaying presentations, videos, and high-resolution graphics.

In terms of connectivity, the CP-X885W and CP-X880W offer a comprehensive range of options. They feature multiple input ports, including HDMI, USB, and VGA, allowing users to connect various devices such as laptops, Blu-ray players, and document cameras seamlessly. The inclusion of a USB port enables direct access to files, enhancing convenience for users who want to project without needing a computer.

Both projectors come equipped with Hitachi's innovative technologies, such as the Image Optimizer, which automatically adjusts the image quality based on the content being displayed. This ensures that pictures are vibrant, with accurate colors and sharp details, regardless of the source material. Additionally, the incorporation of a sophisticated lamp technology results in an impressive lamp life of up to 5,000 hours in normal mode, minimizing maintenance needs and reducing total cost of ownership.

The CP-X885W and CP-X880W models also prioritize ease of use and installation. They feature a 1.6x optical zoom lens, allowing for flexibility in setup, as users can project large images from various distances. The projectors are designed with lightweight and compact form factors, making them easy to transport and mount.

In conclusion, the Hitachi CP-X885W and CP-X880W offer an impressive combination of brightness, resolution, connectivity options, and innovative features, making them suitable for diverse environments. Whether in a classroom or a conference room, these projectors stand out as reliable tools for effective visual communication.
Top Page Image Contents