Hitachi CP-X880W, CP-X885W user manual Screen Menu

Page 38

MULTIFUNCTIONAL SETTINGS (continued)

SCREEN Menu

With the SCREEN menu, the five items shown in the Table below can be performed. Please perform each operation in accordance with the instructions in the Table.

MENU

MAIN

BLANK

MyScreen

PICTURE-1

START UP

ORIGINAL

PICTURE-2

MyScreen

 

INPUT

MyScreen Size

 

AUTO

MyScreen Lock

 

SCREEN

 

 

OPTION

 

 

WIRELESS

 

 

: SELECT

 

 

SCREEN Menu

 

 

 

 

 

 

 

Example : SCREEN Menu

 

 

 

 

 

 

 

 

 

(BLANK)

Item

 

 

 

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Selection of BLANK Screen:

 

 

 

 

 

 

 

 

 

 

MyScreen

ORIGINAL

.

 

.

.

.

.

 

 

.

 

 

 

 

 

 

 

The BLANK Screen may be voluntarily selected. The BLANK Screen is displayed when the screen

 

has been erased (i.e., made to vanish) by manipulating the BLANK button (please refer to the

 

“Temporarily Blanking the Screen” section of the separate booklet, Vol. 1 (Basic)).

BLANK

MyScreen: Using the MyScreen category (see this Table, below), one can register a desired screen

 

(or screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen.

 

ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).

 

Option screens: Various colored non-patterned (plain) screens displayed within the Menus.

•The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain) black color screen several minutes after being displayed.

 

Selection of START UP Screen: MyScreen

ORIGINAL

TURN OFF

 

The START UP Screen may be voluntarily selected. The START UP Screen is displayed when

 

no signal has been inputted, or when spec signals are being inputted.

 

 

MyScreen: Using the MyScreen category (see this Table, below), one can register a desired screen

START UP

(or screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen.

ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).

 

 

TURN OFF: A non-patterned (plain) blue color screen.

 

 

•The MyScreen and ORIGINAL screens will switch to the BLANK screen (see above in this table) a few minutes after being displayed. If the BLANK screen is the MyScreen or ORIGINAL screen, it will turn immediately to a solid black screen.

Registration of MyScreen:

When this item is executed, the MyScreen Menu for registration of MyScreen for the BLANK Screen and the START UP Screen is displayed. When operations are performed in accordance with this Menu, one can “cut” and register desired screens from among the received images within the display.

1.After the “Do you start capturing this picture?” message has been displayed, pressing the ESC (or RESET) button interrupts execution of the MyScreen. When the ENTER button is pressed, the picture becomes static (no longer moves), and a frame for picture cutting, as well as the message that follows below, appear. Please press the button when the screen you want to register is currently being displayed.

MyScreen

2. When the “Move the capture area as you want.” message has been displayed, pressing the ESC (or RESET)

 

 

button will eliminate the static state of the picture, and operations can be performed again from operation 1.

 

The frame can be moved using the

buttons. After designating the screen you

 

want to register, pressing the ENTER button will initiate screen registration. The registration

 

process takes approximately 1 minute to complete.

 

3.When the registration has been completed, the screen of the registered MyScreen, plus the message, “MyScreen registration is finished,” will be displayed for several seconds, after which the operation is terminated.

MyScreen Size

Selection of MyScreen display size: x1

FULL

 

 

 

 

MyScreen Lock

Invalidation of MyScreen registration function: TURN ON

TURN OFF

When TURN ON is selected, the MyScreen category (see this Table, above) cannot be executed; in

 

this way, one can prohibit rewrites (“writeovers”) of the MyScreen.

 

6

Page 37 Page 39
Image 38
Page 37 Page 39
Contents CP-X880W / CP-X885W Contents Soft carrying case Remote control Projector FeaturesPower cord US Type UK Type Europe Type Projector With Lens CapOnly use the power cord that came with the projector Devices you will be using to the projectorPart Names Remote Control Press and hold in the elevator Buttons Setting UP the ProjectorAdjusting the Projectors Elevator Feet Turn the elevator screw to fine tuneTop view Side view Adjusting the Screen Size and Projection DistanceScreen Connecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerBNC Input DVI Input A a aConnecting to a Display Monitor Connecting to a DVD PlayerConnecting to a VCR Remove the battery cover Using the Remote ControlPutting batteries into the remote control unit Close the battery coverRemote control in an area free from obstacles Using the Remote ControlOperating the remote control Meters with a 40-degree rangeTurning on the Power Turning on the Power Selecting an Input SignalTurning OFF the Power Use the lever switch / to adjust the volume Adjusting the VolumePress the Volume button Temporarily Muting the SoundPress the Position button Adjusting the PositionUse the , , , buttons to adjust the position Automatic Adjustment for Video Input Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Press the Auto buttonAs illustrated on the right, a dialog will appear Correcting Keystone DistortionsPress the Keystone button On the screen to aid you in correcting the distortionUsing the Magnify Feature Freezing the ScreenPress the ONE Touch button Adjusting Screen with ONE-TOUCHWas begun When BNC RGB is selected You can activate the following functions just byPress the Aspect button Selecting the Aspect RatioTemporarily Blanking the Screen Press the Blank buttonPress the Menu button Using the Menu FunctionsUse the lever switch To adjust the level Available Functions Remote Control Operation Operating the PC ScreenDo not use the projector with the lamp cover removed High Voltage High Temperature High PressureLamp Lamp Replacing the lampAIR Filter Caring for the air filterAIR Filter Replacing the air filterCaring for the inside of the projector Caring for the cabinet and remote control transmitterOther Care Caring for the lensFor Technical see the end of this manual Main Menu Multifunctional SettingsMain Menu Item selectionPICTURE-1 Menu PICTURE-1 MenuPICTURE-2 Menu PICTURE-2 MenuInput Menu Multifunctional SettingsInput Menu Auto Menu Auto MenuScreen Menu Screen MenuOption Menu Wireless MenuOption Menu Related Messages Regarding the Indicator Lamps Power Lamp TempVol.2-3 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-2 Vol.2-7Specification SpecificationsDimension Diagram Unit mmWarranty and AFTER-SERVICE RGB in 1/2 Signal Connector PIN AssignmentSignal Terminal Specification Sub 15-pin ShrinkExample of Computer Signal Resolution FH kHz FV Hz Rating Signal mode Display modeInitial SET Signals USB Mouse Connection to the Mouse ControlADB Mouse PS/2 MouseRS-232C Communication Command dataConsist of header 7 bytes + command data 6 bytes ProtocolRS-232C Communication Command data chart C4 D3Be EF BA D2 Be EF AD D0 Be EF CB D0 Regulatory Notices Hitachi Business Systems Nordic Hitachi Europe GmbHHitachi Sales Europe GmbH Hitachi France
Related manuals
Manual 56 pages 57.71 Kb

CP-X880W, CP-X885W specifications

The Hitachi CP-X885W and CP-X880W projectors are powerful and versatile projection solutions tailored for educational and corporate environments. Known for their reliability and superior performance, both models deliver high-quality visuals with a focus on user-friendly operations.

One of the outstanding features of the CP-X885W and CP-X880W is their brightness, rated at 3,600 ANSI lumens. This level of brightness allows the projectors to function effectively in a variety of lighting conditions, ensuring that presentations and videos are visible even in well-lit rooms. The native WXGA resolution (1280x800) contributes to sharp, detailed images, making these projectors ideal for displaying presentations, videos, and high-resolution graphics.

In terms of connectivity, the CP-X885W and CP-X880W offer a comprehensive range of options. They feature multiple input ports, including HDMI, USB, and VGA, allowing users to connect various devices such as laptops, Blu-ray players, and document cameras seamlessly. The inclusion of a USB port enables direct access to files, enhancing convenience for users who want to project without needing a computer.

Both projectors come equipped with Hitachi's innovative technologies, such as the Image Optimizer, which automatically adjusts the image quality based on the content being displayed. This ensures that pictures are vibrant, with accurate colors and sharp details, regardless of the source material. Additionally, the incorporation of a sophisticated lamp technology results in an impressive lamp life of up to 5,000 hours in normal mode, minimizing maintenance needs and reducing total cost of ownership.

The CP-X885W and CP-X880W models also prioritize ease of use and installation. They feature a 1.6x optical zoom lens, allowing for flexibility in setup, as users can project large images from various distances. The projectors are designed with lightweight and compact form factors, making them easy to transport and mount.

In conclusion, the Hitachi CP-X885W and CP-X880W offer an impressive combination of brightness, resolution, connectivity options, and innovative features, making them suitable for diverse environments. Whether in a classroom or a conference room, these projectors stand out as reliable tools for effective visual communication.
Top Page Image Contents