Hitachi CP-X885W, CP-X880W user manual Initial SET Signals

Page 47

INITIAL SET SIGNALS

The following signals are used for the initial settings.

The signal timing of some computer models may be different. In such case, refer to adjust the V.POSIT and H.POSIT of the menu.

Back porch b							Front porch d
DATAHSYNC
				Display interval c
				Display interval c
	Sync a

Computer /						Horizontal signal timing (µs)
Signal
Signal						a	b			c		d
						a	b			c		d
TEXT						2.0	3.0		20.3			1.0

VGA (60Hz)						3.8	1.9		25.4			0.6

Mac 13"mode						2.1	3.2		21.2			2.1

VGA (72Hz)						1.3	3.8		20.3			1.0

VGA (75Hz)						2.0	3.8		20.3			0.5

VGA (85Hz)						1.6	2.2		17.8			1.6

SVGA (56Hz)						2.0	3.6		22.2			0.7

SVGA (60Hz)						3.2	2.2		20.0			1.0

SVGA (72Hz)						2.4	1.3		16.0			1.1

SVGA (75Hz)						1.6	3.2		16.2			0.3

SVGA (85Hz)						1.1	2.7		14.2			0.6

Mac 16"mode						1.1	3.9		14.5			0.6

XGA (60Hz)						2.1	2.5		15.8			0.4

XGA (70Hz)						1.8	1.9		13.7			0.3

XGA (75Hz)						1.2	2.2		13.0			0.2

XGA (85Hz)						1.0	2.2		10.8			0.5

1152⋅864 (75Hz)						1.2	2.4		10.7			0.6

1280⋅960 (60Hz)						1.0	2.9		11.9			0.9

1280⋅1024 (60Hz)						1.0	2.3		11.9			0.4

1280⋅1024 (75Hz)						1.1	1.8		9.5			0.2

1280⋅1024 (85Hz)						1.0	1.4		8.1			0.4

1600⋅1200 (60Hz)						1.2	1.9		9.9			0.4

Back porch b						Front porch d
DATAVSYNC
				Display interval c


	Sync a

Computer /				Vertical signal timimg (lines)
Signal
				a	b					c		d

TEXT		3			42		400					1

VGA (60Hz)		2			33		480					10

Mac 13"mode		3			39		480					3

VGA (72Hz)		3			28		480					9

VGA (75Hz)		3			16		480					1

VGA (85Hz)		3			25		480					1

SVGA (56Hz)		2			22		600					1

SVGA (60Hz)		4			23		600					1

SVGA (72Hz)		6			23		600					37

SVGA (75Hz)		3			21		600					1

SVGA (85Hz)		3			27		600					1

Mac 16"mode		3			39		624					1

XGA (60Hz)		6			29		768					3

XGA (70Hz)		6			29		768					3

XGA (75Hz)		3			28		768					1

XGA (85Hz)		3			36		768					1

1152⋅864 (75Hz)		3			32		864					1

1280⋅960 (60Hz)		3			36		960					1

1280⋅1024 (60Hz)		3			38		1024					1

1280⋅1024 (75Hz)		3			37		1024					2

1280⋅1024 (85Hz)		3			44		1024					1

1600⋅1200 (60Hz)		3			46		1200					1

3

Image 47

Contents CP-X880W / CP-X885W Contents US Type UK Type Europe Type Projector With Lens Cap Projector FeaturesPower cord Soft carrying case Remote controlDevices you will be using to the projector Only use the power cord that came with the projectorPart Names Remote Control Turn the elevator screw to fine tune Setting UP the ProjectorAdjusting the Projectors Elevator Feet Press and hold in the elevator ButtonsTop view Side view Adjusting the Screen Size and Projection DistanceScreen Connecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesA a a BNC Input DVI InputConnecting to a Display Monitor Connecting to a DVD PlayerConnecting to a VCR Close the battery cover Using the Remote ControlPutting batteries into the remote control unit Remove the battery coverMeters with a 40-degree range Using the Remote ControlOperating the remote control Remote control in an area free from obstaclesTurning on the Power Selecting an Input Signal Turning on the PowerTurning OFF the Power Temporarily Muting the Sound Adjusting the VolumePress the Volume button Use the lever switch / to adjust the volumePress the Position button Adjusting the PositionUse the , , , buttons to adjust the position Press the Auto button Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Automatic Adjustment for Video InputOn the screen to aid you in correcting the distortion Correcting Keystone DistortionsPress the Keystone button As illustrated on the right, a dialog will appearFreezing the Screen Using the Magnify FeatureYou can activate the following functions just by Adjusting Screen with ONE-TOUCHWas begun When BNC RGB is selected Press the ONE Touch buttonPress the Blank button Selecting the Aspect RatioTemporarily Blanking the Screen Press the Aspect buttonPress the Menu button Using the Menu FunctionsUse the lever switch To adjust the level Operating the PC Screen Available Functions Remote Control OperationDo not use the projector with the lamp cover removed High Voltage High Temperature High PressureLamp Replacing the lamp LampCaring for the air filter AIR FilterReplacing the air filter AIR FilterCaring for the lens Caring for the cabinet and remote control transmitterOther Care Caring for the inside of the projectorFor Technical see the end of this manual Item selection Multifunctional SettingsMain Menu Main MenuPICTURE-2 Menu PICTURE-1 MenuPICTURE-2 Menu PICTURE-1 MenuInput Menu Multifunctional SettingsInput Menu Auto Menu Auto MenuScreen Menu Screen MenuOption Menu Wireless MenuOption Menu Related Messages Power Lamp Temp Regarding the Indicator LampsVol.2-7 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-2 Vol.2-3Unit mm SpecificationsDimension Diagram SpecificationWarranty and AFTER-SERVICE Sub 15-pin Shrink Signal Connector PIN AssignmentSignal Terminal Specification RGB in 1/2Resolution FH kHz FV Hz Rating Signal mode Display mode Example of Computer SignalInitial SET Signals PS/2 Mouse Connection to the Mouse ControlADB Mouse USB MouseProtocol Command dataConsist of header 7 bytes + command data 6 bytes RS-232C CommunicationRS-232C Communication C4 D3 Command data chartBe EF BA D2 Be EF AD D0 Be EF CB D0 Regulatory Notices Hitachi France Hitachi Europe GmbHHitachi Sales Europe GmbH Hitachi Business Systems Nordic

Related manuals

Manual 56 pages 57.71 Kb

CP-X880W, CP-X885W specifications

The Hitachi CP-X885W and CP-X880W projectors are powerful and versatile projection solutions tailored for educational and corporate environments. Known for their reliability and superior performance, both models deliver high-quality visuals with a focus on user-friendly operations.

One of the outstanding features of the CP-X885W and CP-X880W is their brightness, rated at 3,600 ANSI lumens. This level of brightness allows the projectors to function effectively in a variety of lighting conditions, ensuring that presentations and videos are visible even in well-lit rooms. The native WXGA resolution (1280x800) contributes to sharp, detailed images, making these projectors ideal for displaying presentations, videos, and high-resolution graphics.

In terms of connectivity, the CP-X885W and CP-X880W offer a comprehensive range of options. They feature multiple input ports, including HDMI, USB, and VGA, allowing users to connect various devices such as laptops, Blu-ray players, and document cameras seamlessly. The inclusion of a USB port enables direct access to files, enhancing convenience for users who want to project without needing a computer.

Both projectors come equipped with Hitachi's innovative technologies, such as the Image Optimizer, which automatically adjusts the image quality based on the content being displayed. This ensures that pictures are vibrant, with accurate colors and sharp details, regardless of the source material. Additionally, the incorporation of a sophisticated lamp technology results in an impressive lamp life of up to 5,000 hours in normal mode, minimizing maintenance needs and reducing total cost of ownership.

The CP-X885W and CP-X880W models also prioritize ease of use and installation. They feature a 1.6x optical zoom lens, allowing for flexibility in setup, as users can project large images from various distances. The projectors are designed with lightweight and compact form factors, making them easy to transport and mount.

In conclusion, the Hitachi CP-X885W and CP-X880W offer an impressive combination of brightness, resolution, connectivity options, and innovative features, making them suitable for diverse environments. Whether in a classroom or a conference room, these projectors stand out as reliable tools for effective visual communication.