Hitachi CP-X880W Phenomena That May Easily Be Mistaken for Machine Defects, Vol.2-2, Vol.2-3

Page 42

WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED (continued)

Phenomena That May Easily Be Mistaken for Machine Defects

Before requesting repair, check in accordance with the following chart. If the situation cannot be corrected, then contact your dealer.

Phenomenon

Cases not involving a machine defect

Items to be confirmed

Reference

Page(s)

 

 

 

 

 

 

 

 

The main power source is not ON.

Turn on the main power.

Vol.1-3, 15

 

 

 

 

The electrical power cord is not plugged in.

Correctly connect the power cord.

 

 

 

 

 

 

Power does not

 

Be sure to press the “O” (power OFF) side

 

come ON

The main power source has been

of the main power switch, and leave this OFF

Vol.1-15

 

interrupted during operation, such as by

for approximately 20 minutes. After the unit

 

a power outage (blackout), etc.

has sufficiently cooled down, turn ON the

 

 

 

power source.

 

 

 

 

 

No sound or

The input changeover settings

Select the input signal, and

Vol.1-16

are mismatched.

correct the settings.

pictures are

 

 

 

 

 

 

 

outputted

No signal is being inputted.

Correctly connect the connection cord.

Vol.1-8-12

 

 

 

 

 

The electrical wiring to this unit

Correctly connect the connection cord.

Vol.1-8-12

 

is not correctly connected.

Pictures are

 

 

 

 

 

The volume setting has been set at (or

 

Vol.1-18

displayed, but no

Adjust the VOLUME setting to a higher level.

adjusted to) an extremely low level.

sounds are heard

 

 

 

 

 

The MUTE mode is the current setting.

Press the MUTE button to release

Vol.1-18

 

 

 

(change) the MUTE mode setting.

 

 

The electrical wiring to this unit

Correctly connect the connection cord.

Vol.1-8-12

Sounds are

is not correctly connected.

 

 

heard, but no

The brightness setting has been set at

Adjust the BRIGHT setting to a

Vol.2-2

pictures are

(or adjusted to) an extremely low level.

brighter level.

 

displayed

 

 

 

The lens cap has not been removed.

Remove the lens cap.

Vol.1-15

 

 

 

 

 

Colors have a faded-

 

Perform picture adjustments by changing the

Vol.2-3

out appearance

Color depth setting or color tone setting

COLOR BAL R, the COLOR BAL B, and/or the

Color tone is poor

 

TINT settings, etc.

 

 

 

 

 

 

The brightness setting and/or contrast

Perform picture adjustments by changing the

Vol.2-2

 

setting has not been properly adjusted.

BRIGHT and/or CONTRAST settings, etc.

 

Pictures appear

The WHISPER mode is the current

Change (by releasing) from the

Vol.2-7

dark

setting.

WHISPER mode.

 

 

Lamp is approaching the end of its

Exchange the old lamp with a new

Vol.1-27, 28

 

product lifetime.

lamp.

 

 

 

 

 

Pictures appear

Either the FOCUS setting or the H

Adjust the FOCUS and H PHASE settings.

Vol.1-16

blurry

PHASE is not properly adjusted.

Vol.2-3

 

 

 

 

 

Input signal changes

INPUT dial is set between the click

Turn the INPUT dial and set it at the

Vol.1-16

with no-operation.

points.

click point.

 

NOTE

Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and such do not constitute or imply a machine defect.

10

Page 41 Page 43
Image 42
Page 41 Page 43
Contents CP-X880W / CP-X885W Contents Soft carrying case Remote control Projector FeaturesPower cord US Type UK Type Europe Type Projector With Lens CapOnly use the power cord that came with the projector Devices you will be using to the projectorPart Names Remote Control Press and hold in the elevator Buttons Setting UP the ProjectorAdjusting the Projectors Elevator Feet Turn the elevator screw to fine tuneAdjusting the Screen Size and Projection Distance ScreenTop view Side view Connecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerBNC Input DVI Input A a aConnecting to a DVD Player Connecting to a VCRConnecting to a Display Monitor Remove the battery cover Using the Remote ControlPutting batteries into the remote control unit Close the battery coverRemote control in an area free from obstacles Using the Remote ControlOperating the remote control Meters with a 40-degree rangeTurning on the Power Turning on the Power Selecting an Input SignalTurning OFF the Power Use the lever switch / to adjust the volume Adjusting the VolumePress the Volume button Temporarily Muting the SoundAdjusting the Position Use the , , , buttons to adjust the positionPress the Position button Automatic Adjustment for Video Input Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Press the Auto buttonAs illustrated on the right, a dialog will appear Correcting Keystone DistortionsPress the Keystone button On the screen to aid you in correcting the distortionUsing the Magnify Feature Freezing the ScreenPress the ONE Touch button Adjusting Screen with ONE-TOUCHWas begun When BNC RGB is selected You can activate the following functions just byPress the Aspect button Selecting the Aspect RatioTemporarily Blanking the Screen Press the Blank buttonUsing the Menu Functions Use the lever switch To adjust the levelPress the Menu button Available Functions Remote Control Operation Operating the PC ScreenHigh Voltage High Temperature High Pressure LampDo not use the projector with the lamp cover removed Lamp Replacing the lampAIR Filter Caring for the air filterAIR Filter Replacing the air filterCaring for the inside of the projector Caring for the cabinet and remote control transmitterOther Care Caring for the lensFor Technical see the end of this manual Main Menu Multifunctional SettingsMain Menu Item selectionPICTURE-1 Menu PICTURE-1 MenuPICTURE-2 Menu PICTURE-2 MenuMultifunctional Settings Input MenuInput Menu Auto Menu Auto MenuScreen Menu Screen MenuWireless Menu Option MenuOption Menu Related Messages Regarding the Indicator Lamps Power Lamp TempVol.2-3 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-2 Vol.2-7Specification SpecificationsDimension Diagram Unit mmWarranty and AFTER-SERVICE RGB in 1/2 Signal Connector PIN AssignmentSignal Terminal Specification Sub 15-pin ShrinkExample of Computer Signal Resolution FH kHz FV Hz Rating Signal mode Display modeInitial SET Signals USB Mouse Connection to the Mouse ControlADB Mouse PS/2 MouseRS-232C Communication Command dataConsist of header 7 bytes + command data 6 bytes ProtocolRS-232C Communication Command data chart C4 D3Be EF BA D2 Be EF AD D0 Be EF CB D0 Regulatory Notices Hitachi Business Systems Nordic Hitachi Europe GmbHHitachi Sales Europe GmbH Hitachi France
Related manuals
Manual 56 pages 57.71 Kb

CP-X880W, CP-X885W specifications

The Hitachi CP-X885W and CP-X880W projectors are powerful and versatile projection solutions tailored for educational and corporate environments. Known for their reliability and superior performance, both models deliver high-quality visuals with a focus on user-friendly operations.

One of the outstanding features of the CP-X885W and CP-X880W is their brightness, rated at 3,600 ANSI lumens. This level of brightness allows the projectors to function effectively in a variety of lighting conditions, ensuring that presentations and videos are visible even in well-lit rooms. The native WXGA resolution (1280x800) contributes to sharp, detailed images, making these projectors ideal for displaying presentations, videos, and high-resolution graphics.

In terms of connectivity, the CP-X885W and CP-X880W offer a comprehensive range of options. They feature multiple input ports, including HDMI, USB, and VGA, allowing users to connect various devices such as laptops, Blu-ray players, and document cameras seamlessly. The inclusion of a USB port enables direct access to files, enhancing convenience for users who want to project without needing a computer.

Both projectors come equipped with Hitachi's innovative technologies, such as the Image Optimizer, which automatically adjusts the image quality based on the content being displayed. This ensures that pictures are vibrant, with accurate colors and sharp details, regardless of the source material. Additionally, the incorporation of a sophisticated lamp technology results in an impressive lamp life of up to 5,000 hours in normal mode, minimizing maintenance needs and reducing total cost of ownership.

The CP-X885W and CP-X880W models also prioritize ease of use and installation. They feature a 1.6x optical zoom lens, allowing for flexibility in setup, as users can project large images from various distances. The projectors are designed with lightweight and compact form factors, making them easy to transport and mount.

In conclusion, the Hitachi CP-X885W and CP-X880W offer an impressive combination of brightness, resolution, connectivity options, and innovative features, making them suitable for diverse environments. Whether in a classroom or a conference room, these projectors stand out as reliable tools for effective visual communication.
Top Page Image Contents