Hitachi CP-X885W, CP-X880W user manual Auto Menu

Page 37

AUTO Menu

With the AUTO menu, the four items shown in the Table below can be performed.

Please perform each operation in accordance with the instructions in the Table.

MENU

 

 

MAIN

ADJUST

EXECUTE

PICTURE-1

KEYSTONE

 

PICTURE-2

POWER OFF

 

INPUT

ONE TOUCH

 

AUTO

 

 

SCREEN

 

 

OPTION

 

 

WIRELESS

 

 

: SELECT

 

 

Example : AUTO Menu

(ADJUST)

AUTO Menu

Item

 

Description

 

 

 

Auto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, H

 

PHASE, and H SIZE. Use this function with the maximum window size.

 

Auto Adjust (for VIDEO/S-VIDEO):This function automatically selects the

 

appropriate signal mode depending on input signals. This is only performed if

ADJUST

AUTO is selected on the VIDEO menu item (

4 ) of the INPUT menu.

• This function may not be available with a PAL60 signal and certain other

 

 

signals.

 

 

 

 

• The AUTO mode operation requires approximately 10 seconds.

 

• For COMPONENT VIDEO, the signal type is identified automatically even if this

 

function is inactive. For more information on HDTV signals, see HDTV. ( 4 )

 

 

 

 

Automatic keystone distortion correction:

 

 

You can automatically correct vertical keystone distortion corresponding to the

 

angle (forward/backward tilt) at which the unit is set up.

 

• If the projection screen is inclined, or if the projector is angled downwards, it

KEYSTONE

may not be possible to make the correct adjustment when V: INVERT or H&V:

 

INVERT is selected under the MIRROR item of the MAIN menu.

 

• When the zoom adjustment is set to the TELE side, automatic correction may

 

be excessive. The automatic correction function should be used with zoom

 

set to WIDE whenever possible.

 

 

 

 

 

 

 

Adjust POWER OFF Time:

 

 

 

Long (MAX. 99 min.)

Short (Min. 1 min.)

(DISABLE: 0 min.)

POWER OFF

If the time set here passes without valid signal input (there is no signal input, or

signal input is out of specifications), the standby mode is set (see "TURNING

 

 

ON THE POWER" Vol.1 15 ). This function is inactive when DISABLE (0 min.) is

 

selected.

 

 

 

 

 

 

 

Enabling/disabling the KEYSTONE

function using the ONE TOUCH

 

button:

 

 

 

 

TURN ON

TURN OFF

 

 

ONE TOUCH

Pressing the ONE TOUCH button will automatically retrieve pictures and

automatically adjust the screen (see “ADJUSTING SCREEN WITH ONE-

 

 

TOUCH” Vol.1 23 ), and you can also set the function to execute KEYSTONE

 

(see above in this table) simultaneously when pressed. KEYSTONE will be

 

executed if TURN ON is selected.

 

 

 

 

 

 

 

5

Page 36 Page 38
Image 37
Page 36 Page 38
Contents CP-X880W / CP-X885W Contents Power cord Projector FeaturesSoft carrying case Remote control US Type UK Type Europe Type Projector With Lens CapDevices you will be using to the projector Only use the power cord that came with the projectorPart Names Remote Control Adjusting the Projectors Elevator Feet Setting UP the ProjectorPress and hold in the elevator Buttons Turn the elevator screw to fine tuneScreen Adjusting the Screen Size and Projection DistanceTop view Side view Connecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesA a a BNC Input DVI InputConnecting to a VCR Connecting to a DVD PlayerConnecting to a Display Monitor Putting batteries into the remote control unit Using the Remote ControlRemove the battery cover Close the battery coverOperating the remote control Using the Remote ControlRemote control in an area free from obstacles Meters with a 40-degree rangeTurning on the Power Selecting an Input Signal Turning on the PowerTurning OFF the Power Press the Volume button Adjusting the VolumeUse the lever switch / to adjust the volume Temporarily Muting the SoundUse the , , , buttons to adjust the position Adjusting the PositionPress the Position button Automatic Adjustment for RGB Input Using the Automatic Adjustment FeatureAutomatic Adjustment for Video Input Press the Auto buttonPress the Keystone button Correcting Keystone DistortionsAs illustrated on the right, a dialog will appear On the screen to aid you in correcting the distortionFreezing the Screen Using the Magnify FeatureWas begun When BNC RGB is selected Adjusting Screen with ONE-TOUCHPress the ONE Touch button You can activate the following functions just byTemporarily Blanking the Screen Selecting the Aspect RatioPress the Aspect button Press the Blank buttonUse the lever switch To adjust the level Using the Menu FunctionsPress the Menu button Operating the PC Screen Available Functions Remote Control OperationLamp High Voltage High Temperature High PressureDo not use the projector with the lamp cover removed Replacing the lamp LampCaring for the air filter AIR FilterReplacing the air filter AIR FilterOther Care Caring for the cabinet and remote control transmitterCaring for the inside of the projector Caring for the lensFor Technical see the end of this manual Main Menu Multifunctional SettingsMain Menu Item selectionPICTURE-2 Menu PICTURE-1 MenuPICTURE-1 Menu PICTURE-2 MenuInput Menu Multifunctional SettingsInput Menu Auto Menu Auto MenuScreen Menu Screen MenuOption Menu Wireless MenuOption Menu Related Messages Power Lamp Temp Regarding the Indicator LampsVol.2-2 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-3 Vol.2-7Dimension Diagram SpecificationsSpecification Unit mmWarranty and AFTER-SERVICE Signal Terminal Specification Signal Connector PIN AssignmentRGB in 1/2 Sub 15-pin ShrinkResolution FH kHz FV Hz Rating Signal mode Display mode Example of Computer SignalInitial SET Signals ADB Mouse Connection to the Mouse ControlUSB Mouse PS/2 MouseConsist of header 7 bytes + command data 6 bytes Command dataRS-232C Communication ProtocolRS-232C Communication C4 D3 Command data chartBe EF BA D2 Be EF AD D0 Be EF CB D0 Regulatory Notices Hitachi Sales Europe GmbH Hitachi Europe GmbHHitachi Business Systems Nordic Hitachi France
Related manuals
Manual 56 pages 57.71 Kb

CP-X880W, CP-X885W specifications

The Hitachi CP-X885W and CP-X880W projectors are powerful and versatile projection solutions tailored for educational and corporate environments. Known for their reliability and superior performance, both models deliver high-quality visuals with a focus on user-friendly operations.

One of the outstanding features of the CP-X885W and CP-X880W is their brightness, rated at 3,600 ANSI lumens. This level of brightness allows the projectors to function effectively in a variety of lighting conditions, ensuring that presentations and videos are visible even in well-lit rooms. The native WXGA resolution (1280x800) contributes to sharp, detailed images, making these projectors ideal for displaying presentations, videos, and high-resolution graphics.

In terms of connectivity, the CP-X885W and CP-X880W offer a comprehensive range of options. They feature multiple input ports, including HDMI, USB, and VGA, allowing users to connect various devices such as laptops, Blu-ray players, and document cameras seamlessly. The inclusion of a USB port enables direct access to files, enhancing convenience for users who want to project without needing a computer.

Both projectors come equipped with Hitachi's innovative technologies, such as the Image Optimizer, which automatically adjusts the image quality based on the content being displayed. This ensures that pictures are vibrant, with accurate colors and sharp details, regardless of the source material. Additionally, the incorporation of a sophisticated lamp technology results in an impressive lamp life of up to 5,000 hours in normal mode, minimizing maintenance needs and reducing total cost of ownership.

The CP-X885W and CP-X880W models also prioritize ease of use and installation. They feature a 1.6x optical zoom lens, allowing for flexibility in setup, as users can project large images from various distances. The projectors are designed with lightweight and compact form factors, making them easy to transport and mount.

In conclusion, the Hitachi CP-X885W and CP-X880W offer an impressive combination of brightness, resolution, connectivity options, and innovative features, making them suitable for diverse environments. Whether in a classroom or a conference room, these projectors stand out as reliable tools for effective visual communication.
Top Page Image Contents