Hitachi CP-X880W, CP-X885W user manual Multifunctional Settings, Input Menu

MULTIFUNCTIONAL SETTINGS (continued)

INPUT Menu		MENU
		MAIN	BNC	RGB
		PICTURE-1	VIDEO	COMPONENT
		PICTURE-2	HDTV
The three Input menu items listed in the table below can be manipulated. For		INPUT	SYNC ON G
		AUTO	P. IN P. INPUT
RGB input, the reception signal’s horizontal and vertical frequency is displayed		SCREEN	P. IN P. POSIT
		OPTION
on the initial menu screen. Use the table below as a guide for operation.		WIRELESS
		: SELECT
		Example : INPUT Menu
INPUT Menu			(BNC)
Item	Description

BNC Pin (R/CR/PR, G/Y, B/CB/PB, H, V) function selection:

BNC (RGB) BNC (COMPONENT)

	(R) (G) (B) (H) (V)		(CR/PR) (Y) (CB/PB) ( - ) ( - )
BNC	(Pins for RGB)		(Pins for COMPONENT)
	Selecting BNC (RGB) allows the 5 RGB2 pins (R/CR/PR, G/Y, B/CB/PB, H, V) to be
	used as RGB signal BNC input as-is.
	Selecting BNC (COMPONENT) allows the 3 leftmost RGB2 pins (R/CR/PR, G/Y,
	B/CB/PB) to be used as the COMPONENT VIDEO input CR/PR, Y, and CB/PB pins.
	Select Mode of Signal Type (for VIDEO/S-VIDEO):
	AUTO	NTSC	PAL	SECAM	NTSC4.43
	M-PAL	N-PAL
	When AUTO is selected, the video/ S-video input function under ADJUST (				5 are enabled, and is
VIDEO	executed simultaneously so that the optimum signal mode is selected from among the modes listed above.

Use this function if the image becomes unstable with VIDEO/S-VIDEO. (e.g. The image becomes irregular, or lacks color.)

•AUTO mode may not function correctly with a PAL60 signal and certain other signals.

•The AUTO mode operation requires approximately 10 seconds.

•For COMPONENT VIDEO, the signal type is identified automatically even if this function is inactive. For a HDTV signal, refer to the item HDTV below.

HDTV	Select HDTV Signal Mode: 1080i	1035i
	• If the selected HDTV mode is incompatible with the input signal, the picture may be distorted.
	On/Off SYNC ON G Mode: TURN ON	TURN OFF
	Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode
SYNC ON G	allows reception of SYNC on G.

•In the SYNC ON G mode, the picture may be distorted with certain input signals. In such a case, remove the signal connector so that no signal is received and turn SYNC ON G off, and then reconnect the signal.

P. IN P. INPUT	P. IN P. screen (*) input signal selection: VIDEO	S-VIDEO
	Selects the signal displayed on the P. IN P. subscreen.

P. IN P. screen (*) display position selection:

P. IN P. POSIT

Selects the position at which the P. IN P. subscreen is displayed.

(*)The P. IN P. (picture-in-picture) function displays the video signal image in a subscreen (P. IN P. screen) on top of the screen on which the RGB signal image is being displayed. (See “Displaying Child Window” Vol.1

24 .)

4