NEC VT45 Connecting Your PC, IBM VGA or Compatibles, Signal cable supplied, Audio cable

Connecting Your PC

IBM VGA or Compatibles

(Notebook type)

Signal cable (supplied)

To mini D-Sub 15-pin connector on the projector. It is recommended that you use a commercially available dis- tribution amplifier if connecting a signal cable longer than the supplied one.

C

SELECT

UNEM

S-
VID
EO
IN
		A
			UD
VID			IO
EO	L
IN
	/MO
	IN		NO	AUDIO
	R	IN			IN	OUT
						PC
				IN		CONTROL
						RGB
						IN

IBM VGA or Compatibles

(Desktop type)

Audio cable

(not supplied)

Connecting your PC to your VT45 projector will enable you to project your computer’s screen image for an impressive presentation. To connect to a PC, simply:

1.Turn off the power to your projector and computer.

2.Use the supplied signal cable to connect your PC to the projector.

3.Turn on the projector and the computer.

4.If the projector goes blank after a period of inactivity, it may be caused by a screen saver installed on the computer you’ve connected to the projector.

E–18