Lamp Mode, Advanced Options Advanced mode

Lamp Mode

Normal

Eco1

Eco2

This feature enables you to select three brightness modes of the lamp: Normal and Eco modes. The lamp life can be extended up to 2000 hours by using the Eco 2 mode.

Normal Mode:	This is the default setting. This setting con-
	sumes maximum current from the AC in-
	put and results in the most light output.
Eco 1 Mode:	Select this mode to extend the lamp life by
	up to 150%.
Eco 2 Mode:	Select this mode to extend the lamp life by
	up to 200%.

NOTE: During the first one minute of operation the light output from the projector will be brighter than during normal use. The user will notice a slight drop off in brightness after the projector has completed the start-up mode.

Advanced Options (Advanced mode)

Allows for adjustments of image position and stability.

Aspect Ratio

Position/Clock

Resolution

Video Filter

When you select Advanced Options in Advanced mode, the fol- lowing options are available: Aspect Ratio, Position/Clock, Reso- lution, and Video Filter.

Aspect Ratio:

Aspect Ratio

Normal

Zoom

Wide Zoom

Cinema

Aspect Ratio allows you to select the best Aspect mode to display your source image. You can also display the Aspect Ratio window by pressing the “Aspect” button on the re- mote control. (See page E-12).

When 4:3 is selected from the source (i.e. DVD player), the following selections will display:

Normal	Zoom	Wide Zoom	Cinema

Standard	All 4 sides	Left & Right	Left and right
4:3 Aspect	stretched	stretched	stretched

When 16:9 is selected from the source (i.e. DVD player), the following selections will display:

Normal	Zoom	Wide Zoom	Cinema

16:9 image	All 4 sides	Left & right	Left and right
displayed	stretched	stretched	stretched to
in 4:3 mode			display the true
			aspect

NOTE: You can select three image positions for Cinema: Top, center, and bottom.

See page E-33 for setting image positions.

NOTE: Once the Aspect setting has been changed, the “Reso- lution” setting is automatically changed to “Auto”.

E–30