NEC VT45 user manual Phase

[Page 3] (Advanced mode)

Setup

Page1	Page2	Page3	Page4
Auto Adjust		On	Off
Auto Start		On	Off
Power Management		On	Off
Power Off Confirmation		On	Off
Keystone Save		On	Off
Fan High Speed Mode		On	Off

[Page 4] (Advanced mode)

Setup

Page1	Page2	Page3	Page4
Default Source Select		Select
Default Source		RGB
Communication Speed		19200bds
Control Panel Key Lock		Unlock
Clear Lamp Hour Meter
Clear Filter Usage

<Auto Adjust>

When “Auto Adjust” is set to “On”, the projector automati- cally determines the best resolution for the current RGB in- put signal to project an image using NEC’s Advanced AccuBlend Intelligent Pixel Blending Technology.

The image can be automatically adjusted for geometry and stability; “Horizontal Position”, “Vertical Position”, “Clock” and “Phase”.

On:	Automatically adjusts image “Horizontal
	Position”, “Vertical Position”, “Clock” and
	“Phase”.
Off:	User can adjust the image display functions
	(“Horizontal Position”, “Vertical Position”,
	“Clock” and “Phase”) manually.

<Auto Start>

Turns the projector on automatically when the power cable is inserted into an active power outlet and the main power switch is on. This eliminates the need to always use the “Power” button on the remote control or projector cabinet.

<Power Management>

When this option is on and there is no RGB input for five minutes or more, the projector will automatically turn itself off.

NOTE:This feature does not work with Video or S-Video sources.

<Power Off Confirmation>

This option determines whether a confirmation dialog for turning off the projector will appear or not.

<Keystone Save>

This option enables you to save your current keystone set- tings. Saving your change once affects all sources. The changes are saved when the projector is off.

<Fan High Speed Mode>

This option allows you to select two modes for fan speed: high-speed mode and normal speed mode.

When you wish to cool down the temperature inside the pro- jector, select the high-speed mode. High-speed mode is rec- ommended when the projector is used in the high- tempera- ture environment.

<Default Source Select>

You can set the projector to default to any one of its inputs each time the projector is turned on.

Last:	Sets the projector to default to the previous
	or last active input each time the projector
	is turned on.
Auto:	Searches for an active source in order of
	RGB → Video → S-Video and displays the
	first found source.
Select:	Displays the selected source input every
	time the projector is started up. Select an
	input from the pull-down menu.

<Communication Speed>

This feature sets the baud rate of the PC Control port (Mini DIN 8 Pin).

it supports data rates from 4800 to 19200 bps.

The default is 19200 bps. Select the appropriate baud rate for your equipment to be connected.

Setup

Page1	Page2	Page3	Page4
Default Source Select		Select
Default Source		RGB
Communication Speed		19200bds
Control Panel Key Lock		Unlock
Clear Lamp Hour Meter
Clear Filter Usage

<Conrol Panel Key Lock>

This option turns on or off the Control Panel Key Lock func- tion.

NOTE:

•When the cabinet buttons are not locked, “Control Panel Key Lock - Unlock” will be displayed. When the cabinet buttons are locked, “Control Panel Key Lock - Lock” will be displayed.

•This Control Panel Key Lock does not affect the remote control and the PC Control functions.

E–34