NEC VT45 Connecting Your DVD Player, DVD player, Audio Equipment, Component video cable RCA
3

Connecting Your DVD Player

DVD player

	Cr
	Cb
Y	Red
L	Blue
R
	Green
	White
Red

Audio Equipment

L

R

White

Red

Component video cable RCA 3				C
				M
				ECTSEL
				UNE
(not supplied)
S-
VIDEO
IN
		AUD
VIDEO			IO
	L/MO
IN
	IN		NO
			O
			UT
	R	IN		RGB	OUT
					CONTROL
			IN		PC
Red				RGB
Blue					IN
Red
Green
Blue
Green

Optional 15-pin-to-RCA (female)
3 cable

(ADP-CV1)

Audio cable

(not supplied)

You can connect your projector to a DVD player with component outputs or Video output. To do so, simply:

1.Turn off the power to your projector and DVD player.

2.If your DVD player has the component video (Y,Cb,Cr) output, use a commercially available component video cable (RCA
3) and the optional 15-pin-to-RCA (female)
3 cable to connect your DVD player to the RGB INPUT connector on the projector. For a DVD player without component video (Y,Cb,Cr) outputs, use common RCA cables (not provided) to connect a composite VIDEO output of the DVD player to the Video Input of the projector.

3.Turn on the projector and DVD player.

NOTE: Refer to your DVD player’s owner’s manual for more information about your DVD player’s video output requirements,

E–21