NEC SX4000 user manual Basic Operation, Connecting the Power Cable and Turn on the Projector

Page 18

3. BASIC OPERATION

Connecting the Power Cable and Turn on the Projector

Before you turn on your projector, ensure that the computer or video source is turned on and that your lens cap is removed.

1.Connect the supplied power cable to the projector. Plug the supplied power cable into the AC outlet.

OFFPOW

ERON

2. Turn On The Projector

The main power switch is on the rear panel of the projector.

By turning this switch on, the projector will go into its standby mode and the POWER indicator will glow orange. Only after you press the 'POWER ON' button on the remote control or projector cabinet will the POWER indicator turn to green and the projector will fully turn on.

3. Turn Off The Projector

First press the POWER OFF button on the remote control or the projector cabinet for a minimum of two seconds. Allow the fan to cool the projector for three minutes.

This will extend the life of the lamp. After the cooling fan stops working, the POWER indicator will change to a steady orange glow and the projector will be in the stand-by mode. Then turn off the main power switch on the rear panel. The POWER indicator will go out. If you desire to move the projector then unplug the power cable.

NOTE: Immediately after turning on the projector, screen flicker may occur. This is not a fault. Wait 3 to 5 minutes until the lamp lighting is stabilized.

CAUTION: Do not turn off the main power while the cooling fan is working.

Using the Power Cable Stopper

The Power cable wire stopper is provided on the projector so that the cable cannot be accidentally unplugged from the AC IN.

1. Lift up the wire stopper.

Wire stopper

2. Plug the power cable into the AC IN.

Power cable

3. Lift down the wire stopper to hold the power cable.

For North America

Power Switch

OFFPO WERON

	POWER
	OFF		ON
			MENU
	BS -	+	ADDRESS
	BS -	+	ENTER
			ENTER
	ADJUST		IMAGE

PICTURE WHITE BAL. PROJECTOR

ABC DEF GHI

1 2 3

For Europe

E – 11

Image 18

Contents MultiSync SX6000/SX4000 User’s Manual Gsgv Acoustic Noise Information Ordinance AvertissementImportant Safeguards Nettoyage Recommandations importantesAlimentation Précautions contre lincendie ou la déchargeThis warranty may be enforced only by the first purchaser For More INFORMATION, Telephone NEC TECHNOLOGIES, INC1250 N. Arlington Heights Road, Suite Itasca. Illinois Table of Contents Introduction to the MultiSync SX6000/SX4000 Projector Features youll enjoyIntroduction Getting StartedPart Names and Functions Controls Terminal Panel RGB Digital Input/Output Connectors DVI-D 24 pin Provides online help Remote ControlSelect Up/Down/Left/Right Auto RGB onlyRemote Control Precautions Remote Control Battery InstallationScreen Size and Projection Distance InstallationSetting Up Your Projector Throw DistanceFixed Lens TL-08SF Lens Shift Adjustable RangeMaximum Possible Range for TL-1Z/1ZH, TL-2Z and TL-4Z Desktop/ Front VerticalMoving The Projector Selecting a LocationConnecting the Power Cable and Turn on the Projector Using the Power Cable StopperBasic Operation Menu Language Select screen CancelAbout Startup Screen MenuSet up the projector TestSetting up for Double or Triple Stacking in Link Mode Stacking the ProjectorsHookup Link Mode Setting Display the internal crosshatch test patternCeiling Rear Projection Projector OrientationCeiling Front Projection Desktop Rear ProjectionConnecting Your Document Camera When used in standalone operationConnecting Your PC Or Macintosh Computer Connecting Your VCR Or Laser Disc PlayerWhen Used with One Switcher ISS-6020/ISS-6020G VCRWhen Used with Two or More Switchers 100 Inputs How to make connectionsISS-6020 Output to Setting of S8601 Set the DIP switch S8601 of the Switcher as followsRemote 1 Connector When used with the Switcher Pin NoPin Configuration of Optional CTL-6010 Cable When used in stand alone operation Operating Multiple Projectors with Remote Control Projector ID= Remote Address =Link Mode Using the RGB Digital connectors SX6000 onlyConnection for Double or Triple Stacking in Link Mode Connecting a PC with RGB digital connectorGeneral Controls Using The MenusOperation Shutter mechanismCustomizing Basic/Custom Menu List of Direct Key Combinations Menu Tree Stand aloneAdvanced Menu Menu Elements Swicher Entry Edit CommandMenu Descriptions & Functions Source Select Entry ListPicture Adjust SourceWhite Balance ImageVideo Adj Option Adj Ref Adj Signal TypeVolume Lens MemoryProjector Options Factory DefaultTimer LampMenu Setup Switcher Control ContentsHelp Source Information Link ModeTest Pattern Projector InformationSpecifications OpticalElectrical Vcci MechanicalUSA Oceania EN60950 AS/NZS3548 Class a AsiaDigital RGB Board XT SDI BoardSX Hdsdi XT Cmkit1152 61.8 66.0 1280 81.1 76.0 Compatible Input Signal ListSUN SGIFoucus PowerLens Shift ZoomDimensions Drawings do not include the lens part7N8P0142