NEC SX4000 user manual Gsgv Acoustic Noise Information Ordinance, Avertissement

Page 3

CAUTION: To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.

Precautions: Please read this manual carefully before using your NEC MultiSync SX6000/SX4000 Projector and keep the manual handy for future reference.

3. GSGV Acoustic Noise Information Ordinance:

The sound pressure level is less than 70 dB(A) according to ISO 3744 or ISO 7779.

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEP- TACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

AVERTISSEMENT

POUR EVITER UN FEU OU UN RISQUE D’ELECTROCUTION NE PAS EXPOSER CET ENSEMBLE A LA PLUIE OU A L’HUMIDITE; DE MEME, NE PAS BRANCHER LA PRISE POLAIRE AVEC UNE RALLONGE A MOINS QUE LES DENTS DE LA PRE- MIERE NE S’Y INSERENT PLEINEMENT.

EVITER D’OUVRIR LE COFFRET CAR IL Y A, A L’INTERIEUR, DES COMPOSANTS SOUMIS A UNE HAUTE-TENSION; POUR LES REPARATIONS, S’ADRESSER A UN PERSONNEL QUALIFIE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN COVER. NO USER-SERVICEABLE PARTS IN- SIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside of this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

ATTENTION

RISQUE D’ELECTROCUTION

NE PAS OUVRIR

ATTENTION: POUR EVITER LES RISQUES D’ELECTROCUTION, NE PAS OUVRIR LE COUVERCLE. AUCUN DES ELEMENTS INTERNES NE DOIT ETRE REPARE PAR L’UTILISATEUR. NE CONFIER L’ENTRETIEN QU’A UN PERSONNEL QUALIFIE.

L’éclair fléché dans un triangle équilatéral est destiné à avertir l’utilisateur de la présence, dans l’appareil, d’une zone non-isolée soumise à une haute-tension dont l’intensité est suffisante pour constituer un risque d’electrocution.

Le point d’exclamation dans un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’informations de fonctionnement et d’entretien importantes dans la brochure dccompagnant l’appareil.

DOC compliance Notice

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

DOC avis de conformation

Cet appareil numérique de la classe A respecte toutes les exigences du Réglement sur le Matériel D’interférence du Canada.

CAUTION

*In order to reduce any interference with radio and television reception use a signal cable with ferrite core attached. Use of signal cables without a ferrite core attached may cause interference with radio and television reception.

*This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the installation manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

E – ii

Image 3
Contents MultiSync SX6000/SX4000 User’s Manual Avertissement Gsgv Acoustic Noise Information OrdinanceImportant Safeguards Précautions contre lincendie ou la décharge Recommandations importantesAlimentation NettoyageThis warranty may be enforced only by the first purchaser For More INFORMATION, Telephone NEC TECHNOLOGIES, INC1250 N. Arlington Heights Road, Suite Itasca. Illinois Table of Contents Getting Started Features youll enjoyIntroduction Introduction to the MultiSync SX6000/SX4000 ProjectorPart Names and Functions Controls Terminal Panel RGB Digital Input/Output Connectors DVI-D 24 pin Auto RGB only Remote ControlSelect Up/Down/Left/Right Provides online helpRemote Control Battery Installation Remote Control PrecautionsThrow Distance InstallationSetting Up Your Projector Screen Size and Projection DistanceDesktop/ Front Vertical Lens Shift Adjustable RangeMaximum Possible Range for TL-1Z/1ZH, TL-2Z and TL-4Z Fixed Lens TL-08SFSelecting a Location Moving The ProjectorConnecting the Power Cable and Turn on the Projector Using the Power Cable StopperBasic Operation Menu CancelAbout Startup Screen Menu Language Select screenTest Set up the projectorSetting up for Double or Triple Stacking in Link Mode Stacking the ProjectorsHookup Display the internal crosshatch test pattern Link Mode SettingDesktop Rear Projection Projector OrientationCeiling Front Projection Ceiling Rear ProjectionConnecting Your VCR Or Laser Disc Player When used in standalone operationConnecting Your PC Or Macintosh Computer Connecting Your Document CameraVCR When Used with One Switcher ISS-6020/ISS-6020GHow to make connections When Used with Two or More Switchers 100 InputsSet the DIP switch S8601 of the Switcher as follows ISS-6020 Output to Setting of S8601Remote 1 Connector When used with the Switcher Pin NoPin Configuration of Optional CTL-6010 Cable When used in stand alone operation Projector ID= Remote Address = Operating Multiple Projectors with Remote ControlConnecting a PC with RGB digital connector Using the RGB Digital connectors SX6000 onlyConnection for Double or Triple Stacking in Link Mode Link ModeShutter mechanism Using The MenusOperation General ControlsCustomizing Basic/Custom Menu List of Direct Key Combinations Stand alone Menu TreeAdvanced Menu Menu Elements Entry List Entry Edit CommandMenu Descriptions & Functions Source Select SwicherImage Adjust SourceWhite Balance PictureVideo Adj Option Adj Lens Memory Signal TypeVolume Ref AdjLamp Factory DefaultTimer Projector OptionsMenu Setup Switcher Control ContentsHelp Projector Information Link ModeTest Pattern Source InformationSpecifications OpticalElectrical Oceania EN60950 AS/NZS3548 Class a Asia MechanicalUSA VcciXT Cmkit XT SDI BoardSX Hdsdi Digital RGB BoardSGI Compatible Input Signal ListSUN 1152 61.8 66.0 1280 81.1 76.0Zoom PowerLens Shift FoucusDrawings do not include the lens part Dimensions7N8P0142