A List of Direct Key Combinations
CTL+ | INPUT | Switches to any selected signal found in the Entry List. | ||
|
|
|
| To enable this combination, you must first assign specific remote keys for direct input |
|
|
|
| selection in the Entry Edit window. |
|
|
| ||
CTL+ ENTER (While displaying Entry list) | Displays the Entry Edit Command window. | |||
|
|
| ||
CTL+ MUTE PICTURE(SHUTTER) | Blocks all Projector Light Output. | |||
|
|
|
| |
CTL+CANCEL |
| Returns to the previous menu without closing the slidebar or dialog. | ||
|
|
|
| |
CTL+ UNDO |
| Clears all menus or adjustment/setting screens. All adjustments are saved automatically. | ||
|
|
|
| |
CTL+ ◀ / ▶ / ▲ / ▼ |
| Moves the slidebar or dialog box horizontally or vertically. | ||
|
|
|
| |
|
| While using zoom on remote control: | Displays the magnifying glass icon. | |
|
|
|
| |
CTL+ ◀ (BS) |
| Deletes one letter or numeral in the entry screen. | ||
|
|
| ||
CTL+MUTE (OSD) |
| Turns off the | ||
|
|
| ||
Displays the Select switcher Input Slot window. | ||||
|
|
|
| NOTE: This feature is available for SW 2 Level mode only. |
|
|
|
| When the SW 1 Level mode is selected, pressing INPUT key switches to the corresponding |
|
|
|
| slot without displaying the Select Slot window. |
|
|
| ||
CTL+ MENU (ADDRESS) | Displays the remote ID entry window. | |||
|
|
| ||
CTL+ IMAGE (PROJECTOR) | Sequentially selects the Projector Options sub menu. | |||
|
|
|
| |
CTL+ | POSITION (LENS) | Displays the Lens Shift control window. | ||
|
|
|
|
|
CTL+ | KEYSTONE | (R) | Turns on red. Available only when the projector is in the test pattern mode. | |
|
|
|
|
|
CTL+ | AMPLITUDE | (G) | Turns on green. Available only when the projector is in the test pattern mode. | |
|
|
| ||
CTL+ ENTRY LIST (B) | Turns on blue. Available only when the projector is in the test pattern mode. | |||
|
|
| ||
CTL+ MAGNIFY (ZOOM) | Zooms the lens in and out | |||
|
|
|
| |
CTL+ (FOCUS) |
| Adjusts the lens focus. | ||
|
|
|
|
|
E – 27