NEC SX4000 user manual Help, Switcher Control, Contents

Page 46

Keystone Save

This option enables you to save your current keystone settings. Saving your change once affects all sources. The changes are saved when you turn off the projector.

Doubler (Video / S-Video Only)

This sets double speed interpolation of the video signal.

On

Non-interlaced display

Off

Interlaced display

NOTE: The setting will take effect from the next video signal display.

Lens Memory

This function applies the stored lens shift, focus, and zoom adjust- ment values to the selected signal.

The function performs a setting that enables or disables the "Adjust (Source)" - "Lens Memory" functions of the menu.

•On -- Enables the lens memory function and apply the stored shift, focus, and zoom setting values to the selected signal.

•Off -- Disables the lens memory function so that there will be no applica- tion of stored shift, focus, and zoom setting values.

NOTE: The shift, focus, and zoom adjustment values can be stored regard- less of whether or not the lens memory function is enabled.

NOTE: In the Link mode the Lens Memory feature is not available.

User Name

Type in your desired name using the INPUT buttons on the remote control.

Select one character at a time with the INPUT buttons 1 through 10(0) and by moving the cursor with the SELECT button. The user name must be 18 characters or less.

Only after completely finishing the selection of the characters, press

ENTER.

[Page 5]

Communication Speed:

This feature sets the baud rate of the PC CONTROL connector (Mini D-Sub 9 Pin).

It supports data rates from 4800 to 38400 bps.

The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected.

Projector ID:

Each projector needs its own unique addresses when used in serial communication mode. You can choose one of 64 unique address using the spin box. First select Enable. Keep pressing increases the number.

To make your setting available, select OK.

Default Source Select

You can set the projector to default to any one of its inputs each time the projector is turned on.

Last

Sets the projector to default to the previous or last active in-

 

put each time the projector is turned on.

Select

Displays the selected source input every time the projector is

 

started up. Select an input from the pull-down menu.

Link Mode

This feature is used for multiple projector connection using RGB Digital Input/Output connectors. The master projector is set to Master. The other slave projectors are set to Slave. When not using Link mode, set to Standalone. See page E-14 for setting up for double stacking in link mode.

Switcher Control

This feature sets the projector in communication with the NEC ISS- 6020 Switchers.

Stand Alone

Use the projector in stand alone operation.

SW 1 Level

Use the projector with one Switcher. (not available

 

in Link mode)

SW 2 Level

Use the projector with two or more Switchers. (not

 

available in Link mode)

When changing this setting, the confirmation message will appear. If you want to restart your projector, select Yes; if not, select No.

NOTE: This setting becomes effective only after the projector is restarted.

Help

Contents

Provides an online help about how to use the menus. An underlined link means that you can move to an adjustment item directly.

Selecting the underlined link and pressing ENTER moves to the corre- sponding adjustment item.

NOTE: The Help Menu may not be displayed correctly when a UXGA signal is displayed.

E – 39

Page 45 Page 47
Image 46
Page 45 Page 47
Contents MultiSync SX6000/SX4000 User’s Manual Gsgv Acoustic Noise Information Ordinance AvertissementImportant Safeguards Nettoyage Recommandations importantesAlimentation Précautions contre lincendie ou la déchargeFor More INFORMATION, Telephone NEC TECHNOLOGIES, INC This warranty may be enforced only by the first purchaser1250 N. Arlington Heights Road, Suite Itasca. Illinois Table of Contents Introduction to the MultiSync SX6000/SX4000 Projector Features youll enjoyIntroduction Getting StartedPart Names and Functions Controls Terminal Panel RGB Digital Input/Output Connectors DVI-D 24 pin Provides online help Remote ControlSelect Up/Down/Left/Right Auto RGB onlyRemote Control Precautions Remote Control Battery InstallationScreen Size and Projection Distance InstallationSetting Up Your Projector Throw DistanceFixed Lens TL-08SF Lens Shift Adjustable RangeMaximum Possible Range for TL-1Z/1ZH, TL-2Z and TL-4Z Desktop/ Front VerticalMoving The Projector Selecting a LocationUsing the Power Cable Stopper Connecting the Power Cable and Turn on the ProjectorBasic Operation Menu Language Select screen CancelAbout Startup Screen MenuSet up the projector TestStacking the Projectors Setting up for Double or Triple Stacking in Link ModeHookup Link Mode Setting Display the internal crosshatch test patternCeiling Rear Projection Projector OrientationCeiling Front Projection Desktop Rear ProjectionConnecting Your Document Camera When used in standalone operationConnecting Your PC Or Macintosh Computer Connecting Your VCR Or Laser Disc PlayerWhen Used with One Switcher ISS-6020/ISS-6020G VCRWhen Used with Two or More Switchers 100 Inputs How to make connectionsISS-6020 Output to Setting of S8601 Set the DIP switch S8601 of the Switcher as followsWhen used with the Switcher Pin No Remote 1 ConnectorPin Configuration of Optional CTL-6010 Cable When used in stand alone operation Operating Multiple Projectors with Remote Control Projector ID= Remote Address =Link Mode Using the RGB Digital connectors SX6000 onlyConnection for Double or Triple Stacking in Link Mode Connecting a PC with RGB digital connectorGeneral Controls Using The MenusOperation Shutter mechanismCustomizing Basic/Custom Menu List of Direct Key Combinations Menu Tree Stand aloneAdvanced Menu Menu Elements Swicher Entry Edit CommandMenu Descriptions & Functions Source Select Entry ListPicture Adjust SourceWhite Balance ImageVideo Adj Option Adj Ref Adj Signal TypeVolume Lens MemoryProjector Options Factory DefaultTimer LampMenu Setup Contents Switcher ControlHelp Source Information Link ModeTest Pattern Projector InformationOptical SpecificationsElectrical Vcci MechanicalUSA Oceania EN60950 AS/NZS3548 Class a AsiaDigital RGB Board XT SDI BoardSX Hdsdi XT Cmkit1152 61.8 66.0 1280 81.1 76.0 Compatible Input Signal ListSUN SGIFoucus PowerLens Shift ZoomDimensions Drawings do not include the lens part7N8P0142
Top Page Image Contents