Moving The Projector
Always carry your projector by the handle. Ensure that the power cord and any other cables connecting to video sources are disconnected before moving the projector. When moving the projector or when it is not in use, cover the lens with the lens cap.
Pulling Out the Handles
Pull out the handle until it clicks into place.
Retracting the Handles
1) Push the lever to unlock and 2) retract the handle.
Selecting A Location
The further your projector is from the screen or wall, the larger the im- age. The minimum size the image can be projected is 80" (2 m) mea- sured diagonally. The largest the image can be is 500" (12.7 m).
500"
400"
300"
200"
80" 100"
WARNING
•Only use your projector on a solid, level surface. If the projector falls to the ground, you can be injured and the projector severely dam- aged.
•Do not use the projector where temperatures vary greatly. The pro- jector must be used at temperatures between 40 degrees F (5 de- gree C) and 95 degrees F (35 degree C).
•Do not expose the projector to moisture, dust, or smoke. This will degrade the screen image.
•Ensure that you have adequate ventilation around your projector for proper heat dissipation. Do not cover the vents on the projector cabi- net.
E – 10