2.Press the up or down arrow button, select Setup, and press the OK button.
3.Select Fax Settings and press the OK button. You see this screen:
4.Select Fax Setting Wizard and press the OK button.
5.Press the up arrow button to start setting up your fax settings.
6.Use the numeric keypad to enter the sender name for your fax source, such as your name or a business name. You can enter up to 40 characters. Press the OK button when you are done.
7.Use the numeric keypad to enter your fax number, up to 20 characters. Press the OK button when you are done.
8.On the Distinctive Ring Setting screen, do one of the following:
•If you have subscribed to a distinctive ring service from your telephone company, press the up arrow button. Then, select the ring pattern to be used for incoming faxes and go to step 13.
•If you do not have distinctive ring service, press the down arrow button and go to the next step.
Note:
•Distinctive ring service allows you to have several phone numbers on one phone line. Each number is assigned a different ring pattern. You can use one number for voice calls and another for fax calls. Select the ring pattern assigned to fax calls in the DRD Setting.
•If you select On or one of the ring patterns other than All, Receive Mode is automatically set to Auto.
9.Do one of the following:
•If you connected an external telephone or answering machine to the product's EXT port, press the up arrow button and go to the next step.