7.Do the following, depending on the results of the product check:
•If the page prints and the nozzle check pattern is complete, the product is operating properly. Any operation problem you may have could be caused by your computer, cable, software, or selected settings. Check the other solutions in this book or try uninstalling and reinstalling your printer software.
•If the page prints but the nozzle check pattern has gaps, clean or align the print head.
•If the page does not print, the product may have a problem. Check the other solutions in this manual. If they do not work, contact Epson.
Parent topic: Solving Problems
Related concepts
Print Head Cleaning
Print Head Alignment
When to Uninstall Your Product Software
Related references
Where to Get Help
Resetting Control Panel Defaults
If you have a problem with settings on the product control panel, you can reset them to their factory defaults. You can choose which settings to reset or reset them all.
1.Press the up or down arrow, select Setup, and press the OK button.
2.Press the up or down arrow buttons, select Restore Default Settings, and press the OK button. You see this screen:
198