Kyocera KM-3650w operation manual

Page 42

2.Check the position of the paper in the machine.

If the paper is accessible from the front side as the right photo, go to the following procedure 3.

If the paper is impossible to access from the front side because the end of paper is deep in the machine as the following photo, go to the following procedure 4.

Paper

3.Simply pull out the paper to the front side when accessible from the front side.

3-9

Chapter 3 Error Correction

Image 42
Contents KM-3650w Table of Contents Maintenance Chapter Before Use Originals Prohibited from Duplication Reference Law Prohibited items to copyFeatures Specifications GeneralPrinter part 4MIL PF4DMEScanner part LEDAppearance Front viewRear view Specifications for the Scan Original Page Rough surface Carbon paper for example Punched Before Use Specifications for the Printing Paper Papers not available to useKeeping the paper in the custody Measures against environmental condition Chapter Basic Operations Turning on the Machine Turning off the Machine Replacement of Roll Paper Page Page Page Page Replacement of Toner Cartridge Page Page Page Set of Cut Sheet Paper to the Bypass Feeder Copying Emergent Stop of Scan or Copy Dehumidifying the Roll Paper Option Chapter Error Correction Operator Call Errors Paper jamPaper jam in the Roll Deck. Set the roll paper correctly Page Page Paper jam in the bypass feeder. Remove the paper Page Page Paper jam in exit area. Open the cover, and remove the paper Page Page Original Jam. Open the cover, and remove the original Open errors Cover is open. Close the Cover. or Printer is starting upPage Roll Deck is open. Close the Roll Deck Close the scanner cover Other messages Set XX roll paper to the Roll DeckSet a paper to the bypass feeder Warm Sleep Mode Toner empty. Replace the toner cartridgePower Save Mode Service Call Errors Chapter Cleaning of Each Part Scanner UnitPage Print Engine Page Operation Panel Page Page 2006 Is a trademark of Kyocera Corporation 2006.3 Rev.1.0