Kyocera KM-3650w operation manual Scanner part, Led

Page 9

1. 3. 3		Scanner part

	Subject		Specification
	Reading sensor		Contact Image Sensor (CIS)
			(5 pieces of A4 sized CIS)
	Light source		LED
	Scanning speed		65mm/sec.
	Setting of original		Face up
	Starting point of scan		Center
	Scan width		Max. : 914mm (36”)
			Min. : 279.0mm (11”)
	Scan length		Max. : 3,600mm
			Min. : 210mm (8.3”)
	Margin area		3mm from leading, trailing and both side edges
	Optical resolution		600dpi
	Digital resolution		600, 400, 300, 200, 100dpi
	Original transportation		Sheet through type
	Transportable original		Max. : 0.60mm
	thickness		Min. : 0.05mm

						NOTE
				If the thickness is thinner than 1.6mm, it can be transported.
				But we will not guarantee the image quality and reliability of
				original transportation.

NOTE

The above specifications may change without notice.

1-6	Chapter 1 Before Use

Image 9

Contents KM-3650w Table of Contents Maintenance Chapter Before Use Reference Law Prohibited items to copy Originals Prohibited from DuplicationFeatures General Specifications4MIL PF4DME Printer partLED Scanner partFront view AppearanceRear view Specifications for the Scan Original Page Rough surface Carbon paper for example Punched Before Use Papers not available to use Specifications for the Printing PaperKeeping the paper in the custody Measures against environmental condition Chapter Basic Operations Turning on the Machine Turning off the Machine Replacement of Roll Paper Page Page Page Page Replacement of Toner Cartridge Page Page Page Set of Cut Sheet Paper to the Bypass Feeder Copying Emergent Stop of Scan or Copy Dehumidifying the Roll Paper Option Chapter Error Correction Operator Call Errors Paper jamPaper jam in the Roll Deck. Set the roll paper correctly Page Page Paper jam in the bypass feeder. Remove the paper Page Page Paper jam in exit area. Open the cover, and remove the paper Page Page Original Jam. Open the cover, and remove the original Cover is open. Close the Cover. or Printer is starting up Open errorsPage Roll Deck is open. Close the Roll Deck Close the scanner cover Other messages Set XX roll paper to the Roll DeckSet a paper to the bypass feeder Toner empty. Replace the toner cartridge Warm Sleep ModePower Save Mode Service Call Errors Chapter Scanner Unit Cleaning of Each PartPage Print Engine Page Operation Panel Page Page 2006 Is a trademark of Kyocera Corporation 2006.3 Rev.1.0