Kyocera KM-3650w operation manual Print Engine

Page 56

4. 1. 2 Print Engine

Clean each Guide Film and Guide Plate once per a week, as the toner or paper dust may accumulates on such part which may result in a defective print image.

1.Confirm that the machine is turned off.

2.Open the Engine Unit pulling up the Engine Unit Open Levers (1). 1

3.Wipe each Guide Film (2) and Guide Plate (3) with a soft dry cloth to remove the toner or paper dust.

2

3

4-4	Chapter 4 Maintenance

Image 56

Contents KM-3650w Table of Contents Maintenance Chapter Before Use Originals Prohibited from Duplication Reference Law Prohibited items to copyFeatures Specifications GeneralPrinter part 4MIL PF4DMEScanner part LEDAppearance Front viewRear view Specifications for the Scan Original Page Rough surface Carbon paper for example Punched Before Use Specifications for the Printing Paper Papers not available to useKeeping the paper in the custody Measures against environmental condition Chapter Basic Operations Turning on the Machine Turning off the Machine Replacement of Roll Paper Page Page Page Page Replacement of Toner Cartridge Page Page Page Set of Cut Sheet Paper to the Bypass Feeder Copying Emergent Stop of Scan or Copy Dehumidifying the Roll Paper Option Chapter Error Correction Paper jam in the Roll Deck. Set the roll paper correctly Operator Call ErrorsPaper jam Page Page Paper jam in the bypass feeder. Remove the paper Page Page Paper jam in exit area. Open the cover, and remove the paper Page Page Original Jam. Open the cover, and remove the original Open errors Cover is open. Close the Cover. or Printer is starting upPage Roll Deck is open. Close the Roll Deck Close the scanner cover Set a paper to the bypass feeder Other messagesSet XX roll paper to the Roll Deck Warm Sleep Mode Toner empty. Replace the toner cartridgePower Save Mode Service Call Errors Chapter Cleaning of Each Part Scanner UnitPage Print Engine Page Operation Panel Page Page 2006 Is a trademark of Kyocera Corporation 2006.3 Rev.1.0