Kyocera KM-3650w operation manual Service Call Errors

Page 52

3. 2 Service Call Errors

You will note an error message “A significant error occurred. Call the service” on the operation panel if the machine has the fatal error.

At this time one of the following sub messages is displayed also.

Counter Error

Cutter Error

Developer Motor Error

FPGA Error

Fuser Low temp

Fuser Motor Error

Fuser Over temp

HV Charger Error

License Key Error

Main Motor Error

PLEASE CALL YOUR TRAINED SERVICE PERSONNEL TO RESOLVE THESE ERRORS.

If any of the above errors is displayed:

1.Turn off the machine, wait approximately 30 seconds, and then turn on the machine again.

2.If the same error message is displayed, turn off the machine, and then unplug the machine from the wall outlet.

Call your service personnel.

3-19	Chapter 3 Error Correction

Image 52

Contents KM-3650w Table of Contents Maintenance Chapter Before Use Originals Prohibited from Duplication Reference Law Prohibited items to copyFeatures Specifications GeneralPrinter part 4MIL PF4DMEScanner part LEDAppearance Front viewRear view Specifications for the Scan Original Page Rough surface Carbon paper for example Punched Before Use Specifications for the Printing Paper Papers not available to useKeeping the paper in the custody Measures against environmental condition Chapter Basic Operations Turning on the Machine Turning off the Machine Replacement of Roll Paper Page Page Page Page Replacement of Toner Cartridge Page Page Page Set of Cut Sheet Paper to the Bypass Feeder Copying Emergent Stop of Scan or Copy Dehumidifying the Roll Paper Option Chapter Error Correction Paper jam Operator Call ErrorsPaper jam in the Roll Deck. Set the roll paper correctly Page Page Paper jam in the bypass feeder. Remove the paper Page Page Paper jam in exit area. Open the cover, and remove the paper Page Page Original Jam. Open the cover, and remove the original Open errors Cover is open. Close the Cover. or Printer is starting upPage Roll Deck is open. Close the Roll Deck Close the scanner cover Set XX roll paper to the Roll Deck Other messages Set a paper to the bypass feeder Warm Sleep Mode Toner empty. Replace the toner cartridgePower Save Mode Service Call Errors Chapter Cleaning of Each Part Scanner UnitPage Print Engine Page Operation Panel Page Page 2006 Is a trademark of Kyocera Corporation 2006.3 Rev.1.0