FUNCTION CODES
USING FUNCTION CODES | There are a variety of functions available which may be |
| used to temporarily change operating conditions and |
| values, and to obtain system and accessory status |
| information. |
To execute a function code:
•Press the F key.
•Press the numeric keys which correspond to the desired function code.
•Press the Enter key.
Additional input may be necessary:
If the function is used to enable/disable an option (turn an option on or off):
•Press the number one (1) key to turn the option ON; or
Press the number zero (0) key to turn the option OFF.
•Press the Enter key.
If the function requires numeric input:
•Press the number key(s) required.
•Press the Enter key.
If the function is used to increment/decrement a measurement:
•Press the up arrow key to increment the measurement by one (1) inch (25 mm); or
Press the down arrow key to decrement the measurement by one (1) inch (25 mm);
or
Press the right arrow key to increment the measurement by
Press the left arrow key to decrement the measurement by
•Press the Enter key.
To cancel a function or clear the Status Display after executing a function, press the Clear/Cancel key.
|