LOADING FILM | IMPORTANT: | Always load and unload film in subdued, | |
INTO A CASSETTE |
|
| indirect light to help prevent "fogging". |
| The following steps are required to load film into the | ||
| cassette(s): |
| |
| 1. | Select the correct film for your application(s) and | |
|
| appropriate cassette(s). | |
| 2. | Check the cassette display before loading a new roll of film: | |
|
| • Verify that the film supply indicator shows that the | |
|
| cassette is empty. | |
|
| • Verify that there is not a low battery symbol. If a low | |
|
| battery symbol appears, or the display is not visible, | |
|
| replace the battery. | |
| 3. | Place the cassette on a flat surface, with the top cover | |
|
| side up. |
|
4.Press down on the cover latch and turn counterclockwise to unlock the top cover.
5.Remove the top cover and set it aside.
|