Unloading a, Partially Exposed, Roll of Film, FB-7

UNLOADING A	IMPORTANT:		Do not unload a partially exposed roll of film
PARTIALLY EXPOSED			when using duo mode. Images will be lost if
ROLL OF FILM			a partial roll is unloaded.
	It is assumed that all documents have been deposited in the
	exit hopper and the Stop key has been pressed.
	1.	Enter function code F28 Film Leader. This will result in six
		(6) feet of film being advanced onto the take-up spool,
		protecting the filmed images.
	2.	Open the cassette access door.
	3.	Swing the drive release lever (green handle) out.
	4.	Remove film cassette(s).
	5.	Place the cassette on a flat surface, with the top cover
		side up.
	6.	Press down on the cover latch and turn counterclockwise
		to unlock the cover.
	7.	Remove the top cover and set it aside.
	8.	Slide the release lever toward the battery compartment
		and hold it in this position.
	9.	Place a finger over the take-up spool flange to prevent
		the film from unwinding.

10.Cut the film with a pair of scissors; cut where indicated in the illustration (between the idler roller and the take-up spool).

A-61003 September 1993

UNLOADING A