11.Lift the
12.Place the spool into the film box. Allow approximately
2 to 3 inches (5 to 8 cm) of the film to protrude from under the lid of the box. Close the top of the box securely.
13.Write identification data (i.e., subject,. title, date, job number, etc.) on the film box label. The film is now ready for processing.
To continue filming using the unexposed portion of the roll of film:
14.Obtain an empty
15.Unwind approximately 18 inches (46 cm) of film.
16.Fold back approximately 1/2 inch (1 cm) at the end of the film.
17.Pick up the
18.Insert the folded end of the film into the slot in the
19.Rotate the spool counterclockwise to secure the film on the spool.
20.Place the
21.Slide the release lever toward the battery compartment and hold it in this position.
22.Slowly rotate the
23.Replace the top cover on the cassette. Press down on the cover latch and turn it clockwise to lock the cover in place.
NOTE: The cassette may now be inserted into the machine and filming may continue.
|