Kodak A-61003 manual FB-5

Page 45

17. Place the take-up spool over the take-up spindle lugs.

18.Slide the release lever toward the battery compartment and hold it in this position.

19.Slowly rotate the take-up spool couterclockwise three complete turns to secure the film onto the spool. Allow the release lever to return to its normal position.

20.Replace the top cover on the cassette. Press down on the cover latch and turn it clockwise to lock the top cover in place.

NOTE: If the film has been properly loaded, the film supply indicator will now change to show that the cassette is full.

A-61003 September 1993

FB-5

Image 45
Contents Kodak Imagelink Table of Contents EB-1 Operator InterfaceEB-2 Keys/Indicators FunctionEB-3 EB-4 EB-5 Key/Indicator FunctionOperations Checklist EB-6Microimager Scanner 900 or Scanner EB-7Scanner/Microimager EB-8EB-9 Maintenance ChecklistEB-10 Clearing the Document PathFC-1 Using Function CodesFC-2 Function Code SummaryFC-3 Bar Code OCRFC-4 Function Code ListingFC-5 FC-6 FC-7 FC-8 FC-9 FC-10 FC-11 FC-12 FC-13 FC-14 FC-15 OM-1 Operator MessagesOperator Message Listing OM-2Code Operator Message Displayed Description/Action Required OM-3 OM-4 OM-5 OM-6 OM-7 OM-8 OM-9 OM-10 OM-11 Various messages OM-12OM-13 FB-1 Film Cassette Status DisplayLoading Film Into a CassetteFB-2 FB-3 FB-4 FB-5 FB-6 Loading Cassettes Into the MachinePartially Exposed Unloading aRoll of Film FB-7FB-8 FB-9 Unloading a Fully Exposed Roll of FilmKey Functions Application Modes Mode Number Name ApplicationsNew vision of Kodak