| Code | Operator Message Displayed | Description/Action Required |
|
|
|
|
| E112 | Invalid patch level | Invalid patch was used. |
|
|
| Feed correct patch. |
|
|
|
|
| E113 | Enter correct Image Address | Use the NEXT key to enter correct Image |
|
|
| Address. |
|
|
|
|
| E114 | Check current level | Check the current document image level. |
|
|
| Conflicting input regarding the proper level |
|
|
| was received. |
|
|
|
|
| E115 | Verify correct cassettes | Verify that both cassettes are to be used |
|
|
| together before proceeding with filming |
|
|
| mode setup. |
|
|
|
|
| E117 | Enter correct level/Image Address | Document image level assignment and |
| E118 |
| next Image Address input conflict. |
| E119 |
| Specify another document image level, or |
|
|
| use the NEXT key to enter a valid Image |
|
|
| Address. |
|
|
|
|
| E120 | Diagnostic running - do not use | Please do not use; the machine is being |
|
|
| serviced. |
|
|
|
|
| E121 | Check front patch reader | Patch code not recognized. |
| E122 | Check rear patch reader | Verify that the patch document was fed |
|
|
| into the transport in the proper orientation. |
|
|
| If not, refeed the patch document. |
|
|
| If so, change to a |
|
|
| continue. Call service. |
|
|
|
|
| E123 | Command data rejected - resend | Command not recognized. |
|
|
| Enter command again. |
|
|
|
|
| E124 | Command not allowed in this model | Command cannot be performed. |
| E125 |
| Enter a valid command. |
|
|
|
|
| E126 | Enter correct command | Press correct key(s) for mode selected. |
|
|
|
|
| E127 | Feeder waiting for host system | System is busy. No action required. |
|
|
| Wait for message to clear. |
|
|
|
|
| E128 | Feeder adjustment warning | Check and adjust feed and separator |
|
|
| roller gap. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|