FARGO electronic II manual Loading the Overlaminate into the Printer

Page 28

C. Loading the Overlaminate into the Printer

CAUTION!

!

1.Remove the overlaminate from its packaging.

2.The supply end of the overlaminate roll is the side containing the fresh, unused portion of the overlaminate. The take-up end is the other side.

3.Open the top-left cover of the printer by pressing its Cover Release Button. Allow the cover to swing up and open.

4.With the cover open, place the supply end of the overlaminate roll in between the two black Lamination Drive Hubs located just to the left of the printerÕs card flipping mechanism. Make certain that the overlaminate material is fed from underneath the roll. (Hint: The Lamination Drive Hub nearest you, as you are looking into the printer from the front, is spring loaded. Use the end of the roll’s supply core to push in this hub when inserting the overlaminate roll.)

The loading process for both the thermal transfer film and the PolyGuard overlaminate material is the same. Refer to the following steps to load either type of overlaminate into the Printer.

DO NOT TOUCH THE METAL LAMINATION SHIELD OR THE LAMINATION ROLLER WHEN LOADING OVERLAMINATE. YOU WILL BURN YOURSELF!

Supply

Take-up

Take-up	Supply	Card Flipping
Lamination	Lamination	Card Flipping
Drive Hubs	Drive Hubs	Mechanism

23

Image 28

Contents Color ID Card Printer Printing History For Users in the United States Table of Contents Appendix B Interfacing Information How Your Color ID Card Printer Works Special Features IntroductionPage Safety Precautions Sicherheits- maßnahmen VorsichtConsignes de sécurité AvertissementsPrecauciones de seguridad ¡PRECAUCIONPrecauzioni per la Sicurezza Precauções de Segurança CuidadoChinese or Japanese to be keylined here Chinese or Japanese to be keylined here Arabic to be keylined here Getting Started Identifying the Parts Power Ribbons and Cards About RibbonsPage Loading Ribbon into the Printer About Cards Page Loading Cards into the Printer Card Laminating About Printer’s LaminatorAbout Overlaminates Loading the Overlaminate into the Printer Take-up Roll Running the Self Test Applying PowerHooking Up the Printer Connecting the Color ID Card Printer to Your Computer Page Windows Highlight the Install Unlisted or Updated Installing the 32-Bit Print Spooler for Windows Page Setting Up Windows Printer Driver Card Size Ribbon Type Color Matching Overlay Dither ModePanel Graphics Panel Only Split Ribbon Print Page Orientation Fast 32-bit SpoolerDuplex Printing Controls Magnetics Lamination Page Maintenance Supplies RequiredStandard Printhead Cleaning Expanded Printhead Cleaning Cleaning the Printer’s Case Inside Clearing a Card Jam Clearing a Ribbon Jam Cleaning the Card Feed Rollers Cleaning the Drive Roller Maintaining the Cleaning Rollers Mechanical Adjustments AdjustingAdjusting Internal Card Guide Card InputInternal Adjusting Card Separator Flap Card Flap Adjustment Adjusting the Laminator Top Edge Bottom Edge Trouble- shooting Symptoms printer makes strange sounds or stops printing My prints have streaks in them My prints have blotches small voids in themPage Page Technical Specifications Print SpeedMagnetic Stripe Encoding Module IntroductionLocations TrackSending Track Information ~1%JULIE ANDERSON623-85-1253? Interfacing Information Introduction Centronics- type Parallel InterfaceIndex