FARGO electronic II manual Technical Specifications, Print Speed

Page 63

11

Technical Specifications

58

Printing Method:

Dye-sublimation/resin thermal transfer

Printing Resolution:

300 dpi (11.8 dots/mm)

Colors:

Up to 16.7 million

Print Speed:

Approximately 8 seconds (K)

 

Approximately 15 seconds (KO)

 

Approximately 30 seconds (YMCKO)

 

Additional 45 seconds required if applying PolyGuard

 

overlaminate

Printing Area:

Standard CR-80 Card:

 

Card Size

 

2.13Ó (54mm) x 3.38Ó (86mm)

 

Print Area

 

1.93Ó (49mm) x 3.1Ó (80.5mm)

 

Oversize Card:

 

Card Size

 

2.36Ó (60mm) x 3.62Ó (92mm)

 

Print Area

 

2.24Ó (57mm) x 3.5Ó (88mm)

Accepted Card Width:

2.1Ó to 2.63Ó W (53mm to 67mmW)

Accepted Card Length:

3.25Ó to 3.88Ó L (82mm to 98mmL)

Accepted Card Thickness:

.01Ó to .04Ó (.254mm to 1.02mm);

Card Types:

PVC or Polyester cards with polished PVC finish;

 

monochrome resin ribbon required for straight polyester

 

cards

Card Capacity:

Accepts up to 100 standard CR-80 PVC Cards; auto or

 

manual feed

Software Driver:

Windows driver included for IBM-PCÕs and compatibles

Interface:

Standard 8-bit Centronics-type parallel (ECP compatible)

Operating Temperature:

65¼F to 80¼F (18¼C to 27¼C)

Humidity:

Non-condensing 20%Ð60%

Dimensions:

10.44Ó H x 24.79Ó W x 10.94Ó D

 

(265mmH x 630mmW x 278mmD)

Weight:

42 lbs. (19 kg)

Agency Listings:

Safety standards: UL 1950, CSA C2.2 and T†V-GS

 

(IEC-950); Emissions standards: FCC Class A,

 

CRC c1374, Class A and T†V-EMC (IEC-801 -2, -3, -4;

 

CISPR 22, Class B) CE

Supply Voltage:

110-120 or 220-240 VAC

Supply Frequency:

50 Hz/60 Hz

Options:

¥ Magnetic Stripe Encoding Module, High and low

 

coercivity, Tracks 1, 2, and 3

 

¥ CardMaker for Windows software

Page 62 Page 64
Image 63
Page 62 Page 64
Contents Color ID Card Printer Printing History For Users in the United States Table of Contents Appendix B Interfacing Information Introduction How Your Color ID Card Printer Works Special FeaturesPage Safety Precautions Vorsicht Sicherheits- maßnahmenAvertissements Consignes de sécurité¡PRECAUCION Precauciones de seguridadPrecauzioni per la Sicurezza Cuidado Precauções de SegurançaChinese or Japanese to be keylined here Chinese or Japanese to be keylined here Arabic to be keylined here Getting Started Identifying the Parts Power About Ribbons Ribbons and CardsPage Loading Ribbon into the Printer About Cards Page Loading Cards into the Printer About Printer’s Laminator Card LaminatingAbout Overlaminates Loading the Overlaminate into the Printer Take-up Roll Applying Power Running the Self TestHooking Up the Printer Connecting the Color ID Card Printer to Your Computer Page Windows Highlight the Install Unlisted or Updated Installing the 32-Bit Print Spooler for Windows Page Setting Up Windows Printer Driver Card Size Ribbon Type Color Matching Dither Mode OverlayPanel Graphics Panel Only Split Ribbon Print Page Fast 32-bit Spooler OrientationDuplex Printing Controls Magnetics Lamination Page Supplies Required MaintenanceStandard Printhead Cleaning Expanded Printhead Cleaning Cleaning the Printer’s Case Inside Clearing a Card Jam Clearing a Ribbon Jam Cleaning the Card Feed Rollers Cleaning the Drive Roller Maintaining the Cleaning Rollers Card Input Mechanical AdjustmentsAdjusting Adjusting Internal Card GuideInternal Adjusting Card Separator Flap Card Flap Adjustment Adjusting the Laminator Top Edge Bottom Edge Trouble- shooting Symptoms printer makes strange sounds or stops printing My prints have blotches small voids in them My prints have streaks in themPage Page Print Speed Technical SpecificationsIntroduction Magnetic Stripe Encoding ModuleTrack LocationsSending Track Information ~1%JULIE ANDERSON623-85-1253? Introduction Centronics- type Parallel Interface Interfacing InformationIndex
Top Page Image Contents